Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Does it have any markings?
OF the 5 wires, one comes FROM the battery and is hot all the time. One goes to the starter solenoid. One goes to the preheater/preheater solenoid. One feeds the electrical system of the tractor. The other MIGHT be to the lighting system or the lighting system might feed off the tractor's electrical system wire. I'll have to go find the list I made for the Kubota switch I just put on the Ford 1600.

Mitsubishi 1600 ignition switch wiring
Mitsubishi
Replies 16 Post by Cyrus55

You're very welcome.
All good information if you need stuff repaired, since they must be a grey market tractor unless they have "FORD" on NH on the side.

Shibaura SD1500B Water Pump
Shibaura
Replies 21 Post by Cyrus55

Workhorse is not sufficient information to ID the tractor to get help.
Find the ID tag on the tractor and give us more information. Also, there should be a data tag on the engine and that information would be helpful.

workhorse tractor fuel injector pump
Other Tractor Brands
Replies 3 Post by Cyrus55

try this link:

http://www.lciproduct.com/part.aspx?catid=9

Need Pistons Rings for Shibaura S1000
Shibaura
Replies 4 Post by Cyrus55

This does not appear to have the two stage clutch option. With the 2 stage, there is an inner shaft for the pto and an outer, larger shaft for the gear train. I have the parts book for a JM 182. I need a picture for a JM 204 or a Farm Pro 2425.
We're on the right track, though. Thanks.

farm pro 2420 transmission problem
Jinma Farmpro Agracat Nortrac
Replies 8 Post by Cyrus55

According to the specs page and pictures, your tractor was supposed to have 24 inch rims.
Does that mean you do NOT have any 26 inch rims at the moment?
I am going to recommend you go to a tractor junk yard. I believe some of the front wheel assist tractors use 26 inch rims on the front and they are also, POSSIBLY, the 6 bolt pattern you seek. I've seen, mostly JD, sell at Sikeston, MO auction. The tires are worn out on them and they are full of ballast, but it is probably NOT calcium chloride, but some safer, for the rim, chemical. I suspect many brands use the same rim for front wheel assist. There are also several tractor junk yards in Sikeston, so you could make a day of it. Take one of your wheel centers with you to confirm they will fit.

Ford 2120 Rear Rims
Parts and Repair
Replies 20 Post by Cyrus55

Have you tried moving the lower mount of the vertical hitch of the King Kutter to the inside instead of the outside? That should gain you 3/4 inch or more. That might just do it. that's what I've done to my King Kutter and it works for my quick hitch, which is also 27.5 inches.
By all means, modify your equipment, not the quick hitch. The quick hitch is for the ASAE standard.

In the '60's we had a Case tractor with Eagle Hitch, Case's version of 3 point, and it was basically a quick hitch and the arms did NOT sway. We bought a new John Deere implement and it would not fit. We moved the hitch pins to the inside and the Case arms would not clear the hitch frame. The dealer ended up putting an older hitch off a used piece of equipment to make it work.

3 Point Quick Hitch Compatibility Issues
Operating and Attachments
Replies 9 Post by Cyrus55

If it is anything like an older Jinma, the shoes are inside the brake drum. They have to be "persuaded" to come off, but they come off WITH the cover. The big nut you mentioned does just as he explained it. Probably, given my experience, you probably just need to reset the lever arm to a more rear location and try it again to make them work. I found that the rod didn't have enough threads to adjust them to work, otherwise. The are "S" cam brakes and the lever arm moves that S shaped device to spread the shoes inside the drum.

how to replace brake shoes on 2000 20 hp agra cat
Jinma Farmpro Agracat Nortrac
Replies 6 Post by Cyrus55