Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Yes, shears are weak (likely Grade 2) because they are way cheaper and easier to replace than what a higher grade would cause to fail instead.

When installing, don't reef the nut to the point of elongating the bolt -- use locktite, a locknut, a lock washer, or a double nut. If it broke at the threads, use a different length or washers to move the weak spot out of the way.

But MELTED? Something else is going on.

Woods RC5 Bush Hog
Kioti Tractors
Replies 3 Post by auerbach

Mapp gas is the hottest I have on site, and the tip is just a standard soldering tip. I suppose I can try to be precise and hopefully make it brittle enough to punch or drill. If that doesn't work, I'll try a carbide bit and increase to 8/32. Should I go dry or wet n drilling new hole with tap in. Other than that, looks like a long day of taking transaxle off and putting the shaft in the mill.

1200A Secondary Cap Screw
Utility Vehicles UTV/ATV
Replies 16 Post by Coachlarry

How old is the Machine? How long have you owned it?

Any recent work done on it?

Clean thoroughly all areas on tank, fuel lines, carburetor, fuel pump so you can see everything as clear as possible.

I would take it outside and disconnect the spark plug, have someone crank the engine a little while you observe for leaks. Stop cranking and feel all areas for fuel seepage.

The leak is probably very small and why you only smell in garage or in an area with little ventilation.

If it is the carburetor, gaskets could be bad, or needle valve and seat which controls the amount of fuel in the bowl like a toilet. If needle and seat worn out when engine off bowl keeps filling.

L110 John Deere Tractor gas smell
John Deere Tractors
Replies 8 Post by DennisCTB

Noise in that area is NOT normal, nor should you continue to operate it before determining what it is. I would imagine the "adjustment" had something to do with the clutch pedal travel/freeplay. Whether the pedal is up, down, or somewhere between when you hear the noise may help narrow down what's causing it. If the noise(or something similar) was there before purchase, then you and the "dealer" have something to talk about.

Long 2360 noisy transmission
Long
Replies 19 Post by Imfedup

I have a MT372 for sale. Great great tractor. Only selling because I bought another tractor. Can send pics upon request.

MT372 for sale in Illinois
Mitsubishi
Replies 2 Post by Chevy791979

You may be able to cover with a cloth rag and push the hose end on metal and it open plug enough to release the pressure. But as has been said prevention is best here.kt

CK30 Bucket Hydraulic Hoses
Kioti Tractors
Replies 3 Post by kthompson

anybody know anything about these or have any lititure, like to talk to someone who has 1. thanks

sperry rand new holland S-8 1972
Garden Tractors
Replies 1 Post by lgreiss

Could sure use a copy of that manual sent to Copy Cat Printers 12201 E. First, Spokane Valley, WA 9906

Fax 509-927-0062

Much appreciated!

Duerr hp 678 Chipper Manual
Operating and Attachments
Replies 33 Post by RCHazz

Anybody ?

C174 front end lift mount question
Hinomoto
Replies 5 Post by dtacmed

Thanks everyone for the information, it was a weak ground that prevented the light from working. Got that one fixed and added another elsewhere on the tractor.

Plow light problem
Massey Ferguson Tractors
Replies 5 Post by poapony

My sprayer is not a huge sprayer but boy re-plumbing from roller pump to centrifuge pump has been a challenge. The pump I ended up going with is buily by hpro and it has gearbox to speed up the pump using 540 pto. Dummy me told my wife should take no more than half a day and I have spent at least 4 to 6 hours per day on it for three days and yes I will finish it in a couple more..only have the suction hose to hook to the pump and the boom hoses the electric valves. Then do a test run and pray it all works as it should. Have a field of corn that needs spraying.

I went to basics and took the attitude I have no idea what was issue with my sprayer and read beginning with how to select the right pump which also includes how to figure the gpm you need and realize where an issue I had was coming from, way too little gpm to keep chemicals mixed in my tank. The roller pump I had was not even large enough to just keep the chemicals mixed. Have a 500 gallon tank and I needed from 25 to 50 gallons gpm just to keep the chemicals mixed. Way undersize for that and could not find roller pump for 540 rpms to handle the need. Also was told roller pumps will not hold up to wettable power chemicals if not mixed properly. Look forward to having it up and running at is should. kt

pto sprayer pump s volume
Tractor Projects
Replies 13 Post by kthompson

If there are a top shop they will be glad you share this with them and will try to make it right. They will also try to find the problem on their end and fix that. If they are not worthy of the reputation you say they have they will play games or excuses with you. I would tell you share either but do so carefully so not to cause yourself an issue. kt

Long 2360 D124 diesel misses
Long
Replies 13 Post by kthompson

Watch for wire being picked up and it cutting the bottom seal out of the gear box. Another way it can happen if you get the it way over filled and the vent is not able to allow it to seep out when it heats up can damage the seal.

Now the plate..it slips onto the spline shaft if I am right, correct? First I think you must get it where you can work on it and with the cutter being secure. If you must flip it upside down. Take a good penetrating oil and spray it and keep it wet for a day or two if possible. You may want to take a hammer and keep taping the sleeve that is on the gearbox shaft to help break the rust that is hold it on the spline. If you have torch you would heat the thick sleeve on the stump jumper that is sled on the gear box spline shaft.
You might be able to design a simple puller for this with say a piece of channel iron and large bolts. But heat can be a wonderful helper. kt

bleeding gear oil
Mowers Field and Finish
Replies 6 Post by kthompson

Of course the basic is check the fluid level and you probably have.

The post on wear pattern, been there and have a trans on a Kubota that growls for that reason. kt

noisy transmission
Long
Replies 4 Post by kthompson

Not a mechanic but you can tear up the pto clutch without damaging the clutch for the gears or pulling. You should have a pto shaft with a clutch that slips especially on a rough cut mower that will slip when such happens or with a shear pin. You may be able to adjust the pto clutch but do not run it if slipping. It will only make it worse. kt

Farmpro 2425 PTO slipping
Jinma Farmpro Agracat Nortrac
Replies 3 Post by kthompson

When using an auger or tiller attachment the PTO slips or comes to a stop. The clutch seems to operate and function fine driving but only when under load it does this. When my dad had the tractor he was brush hogging one day and said he raked or ground the PTO engagement real bad one day on accident and that is when this problem started occuring. Could this be a clutch issue or something in the gearbox broken or sheared? I am very new to owning a tractor, so any help or insight would be greatly appreciated. Thank you in advance.

Farmpro 2425 PTO slipping
Jinma Farmpro Agracat Nortrac
Replies 1 Post by Daves262

I have a John Deer L110 lawn tractor. After I fill the tractor up there is a gas smell. I see no visible leaks. Any ideas?

L110 John Deer Tractor gas smell
John Deere Tractors
Replies 1 Post by dkinnie

What other testing haveu you done like testing of battery etc.

JD 4410 no instrument lights
John Deere Tractors
Replies 2 Post by DennisCTB

It is a hydro. Thank you!

John Deere 4110 Manual
John Deere Tractors
Replies 7 Post by Gunrush128

Just installed the pump and everything working great. Thanks lee 2519 !

C174 Hydraulic Pump Needed
Hinomoto
Replies 12 Post by dtacmed