Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

7/24
Let me clarify a couple of comments above, not that I am an expert by any means:
Someone in the know at Bush Hog told me, yes, the JD 47 & 48 are theirs. But this'll shock you--ARPS makes the hoes for them! That, however did not come from BH, but I believe it is correct. Talk about coming to your youknowhat via your elbow!

And the JD#7 someone referred to above is an old JD # and a much smaller hoe than the 47 or 48 if memory serves correctly. I know the first poster referred to #7 when they meant 47, but a later poster was comparing the real #7.

Long live Bradco, best there is.

Hoe-pe this helps--Jim

Backhoes JD and Bush Hog
Loaders Back Hoes
Replies 10 Post by Jim Hardwick

You're probably right, but...

Consider what an air filter costs. Then think about what it does, and how much damage a little dust/dirt can do to a diesel engine and injectors. I buy my filters at NAPA, not at the dealer. If I remember correctly, for my John Deere 750, they're about $15. I think of it as cheap insurance to replace it every year.

Changing air filter on TC21D
Parts and Repair
Replies 9 Post by Paul Fox

Had that happen on my 750 once, scared the bejesus out of me. Turned out to be a plugged fuel filter. This was a diesel-sounding knock, only REALLY LOUD, sorta like they sound when they first start.

4100 started knocking something terrible
John Deere Tractors
Replies 5 Post by Paul Fox

Here is the deal on the 3rd scv(not 4th or 5th). The 4200-4700 tractors come with the 3rd valve built into the dual scv body. The kit you buy comes with handle/cable assembly and plubming to operate the valve and get the oil to the rear of the tractor. That is why the first remote outlet(3rd scv) is fairly cheap compared to other manufacturers. Likewise the addition of a 4th or 5th remote will cost substatially more because you must buy the entire valve in addition to the handle/cable and plumbing.
Hope this is clear.
Randy

Installing 3 RD SCV on JD 4400
John Deere Tractors
Replies 5 Post by Randy Eckard

My 1998 copy of The Book (see below) says the B7100 is worth anywhere from $7,000 for a 1992 model in fair condition to $9,320 for a 1998 model in premium condition. Add about $300 for the belly mower, but the price you get will depend a lot on how popular these tractors are in your area.

kubota tractor for sale
Kubota Tractors
Replies 3 Post by KenB

I have a JD 4100 with turf tires. I am thinking of reversing the rear wheels to gain about an inch of spread on each side. Would be nice to have a little more clearance between the 3-point lift bars and rear tires when I have the bush hog installed. If I do this would I still be able to install rear wheel weights?

4100 Rear Wheels
John Deere Tractors
Replies 1 Post by HWD

Larry, Murf; Thanks for the info. I got it done, I'll remember for future ref.
Thank god for sawzalls. I woudn't want to cut through all that harden steel with a hacksaw. David

Cutting Diveshafts
Operating and Attachments
Replies 5 Post by dsg

Of course, I don't know what yours sounds like, but I guess all of them do make some "funny" growling sounds. I've got my second Kubota and they've both had different sounding growls from the hydro in different ranges, but never a problem. In other words, I don't know, but suspect yours is normal.

Hydro sounds
John Deere Tractors
Replies 8 Post by Bird Senter

Almost all mid & front-mounted equipment is designed to run at 1000rpm, and as was stated by Tom, the mower is most efficient at that speed.

mower pto speed
Mowers Field and Finish
Replies 3 Post by Murf

DC, try <www.tractortips.com>. You can select the make and model of the tractor and then you will get a page of specifications about the tractor. There is also a page of serial numbers that will tell you what year yours was made.

Old Kubota
Kubota Tractors
Replies 3 Post by Matt Dewalt

So far I have not been able to find anyone who has one of the tractors that Northern, or Hardy sell that is close enough to go take a look at. I will be making the rounds of the local dealers this week to see what I can find out on the JD/NH/MF and Kubotas. I've talked with a couple of the big landowners in our hunt and they seem to be buying big Kubotas. When I narrow down my selection I'm sure I'll be back with more questions. Thanks to all for the information. If anyone sees any of the tractors of the Northern/Hardy ilk I'd be interested in what they think of them.

Who really makes them
Parts and Repair
Replies 12 Post by Robert Macan

Kelley makes a frame mount kit for the jd4100. I have one mounted on a Yanmar ym1702d, which I rent out. It works great. I'm a Kelley dealer & amgiving a 20% dicount on them. I also have available Woods products, but have no personal experience with their backhoe. For more information contact me at sheaftractor@coiinc.com or 815-284-3226.

JD4100 comments Questions
Loaders Back Hoes
Replies 2 Post by lsheaffer

Yanmar 2210 2wd, 2cylinder water cooled diesel,shuttle shift trans,3 pt hitch,new seat,90% rubber and 5ft tiller. $3850.00dgibbons@ameritech.net

Tractor for sale
Yanmar Tractors
Replies 2 Post by WHITNEY GIBBONS

Matt, check the brakes! I had the same problem with my Ford 1700. The cam that spreds the brakes shoes was rusted and when I applied the right brake real hard it had stuck, however the brake pedal returned all the way back up but the brake rewmained locked, removed the cover,which the brakes shoes are attached to. cleaned the cam and very lightly oiled it. Solved the problem

JD650 Frozen right rear wheel
John Deere Tractors
Replies 2 Post by jim moore

Sorry for taking so long. The number one brand was Kubota but I have a feeling that it is probably JD now. N/H do not try very hard and see it as a low hassle market, by this I mean they ask the dealers in the back end of the year what tractors they require for the following season and then order those tractors. If the dealers do not have the machine that the customer requires then they know that they are unlikley to get it. Therefore New Holland have a no risk compact tractor business in the UK. If they pulled thier finger out they could with the product range avialable in the US become number one. The UK dealers find it very frustrating that the UK range is so limited. The diversity of the tractor market is growing considerably with such manufacturers as Landini, Ferrari, Carraro, TYM, Eurotrac, Jinma, Same and many others joining in the fray.

Front loaders and backhoes
Loaders Back Hoes
Replies 3 Post by Jonathan Skeggs

I have a Kobuta B6100.
I think its 3 pt is a cat 0, too small but gets the work done.
It has a single clutch plate but its PTO has its own seprate 3 speed gear with neutrals between 1 and 2 and between 2 and 3. So its as good as indepen.
I have no experience with a loader on this tractor.
The FS850 rotavator is one great implement. Its used about 95% of the time my B6100 works.
Nuclear_Weapon7.
Hyderabad,
Sindh,
PAKISTAN.

Information on B6100
Kubota Tractors
Replies 5 Post by Nuclear_Weapon7

Your in luck! A company called Hub City makes the unit you need. Part number is 02-20-01402-022 and I believe it is around $600 or so. If you can't find it locally call Messick Farm Equipment in Elizabethtown, Pennsylvania and they can order. This unit bolts right on the back of the transaxle and converts to correct rotation as well as changing to a 1 3/8-6spline shaft. Good luck!
Kevin

reverse rotation
Kubota Tractors
Replies 3 Post by Kevin Walters

Im up to 40 acres bushhogged and running great.Love the little tractor. i think its part mountain goat holds to the hills like glue.

lamborghini tractors
Operating and Attachments
Replies 4 Post by Kevin Gohde

Thinking about it, both the 2020 and the 3010 have the "closed center" hydraulic pump with the variable displacement rotor....This is a lot different from many of the compact tractors -most of which still have the old (cheap and simple) "open center" type of hydraulic system. It sure sounds like you have a restriction somewhere or else a pump problem.....I'm betting on it being the high pressure hydraulic filter. That would sure be nice. If so, you had better get if fixed, as those closed center pumps come dear(deere?).
BTW, doesn't that 48 loader overpower the 2020 tractor a bit? What will she lift?

48 loader vibrates
John Deere Tractors
Replies 5 Post by Roger L.

Darryl, I think that's a common problem unless you're already on a hard, smooth surface, probably the reason most of us use it so much in reverse. And Jerri, I see both skid steer and tractors being used with the front end loader in the float position to clean up piles of dirt or gravel that have been dumped on pavement. You just have to learn now to tilt the edge down where it tries to dig in.

Engaging the quot Float quot Position
Loaders Back Hoes
Replies 16 Post by Bird Senter