Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

One piece of advice I will give you is to watch the hydraulic line just above the midmount mower (when you get it). If you haven't mowed in awhile, the grass will be long and usually you raise the mower to be able to cut it more easily until it is manageable. When you do this, the mid-PTO shaft rubs on the metal line and wears through it. The John Deere fix is to have the dealer adjust it so you can't raise it very high! You may not notice this if the dealer does adjust it since you don't know how high it should go but the extra inch or so can make it much easier to cut through the tall stuff. It is another example of poor engineering but they are unwilling to reroute the line to give proper clearance. They will replace it though when it wears through. Other than that, I have been pleased.

JD 4100
John Deere Tractors
Replies 2 Post by droz

I'm new at this and don't understand currency rates. What does 21,500.00 canadian dollars translate to in u.s. dollars?

Pricing New Holland 1720 Laoader Backhoe
New Holland Tractors
Replies 4 Post by Gary L

I need information on the rear end of my tractor. The lever on the right side of my tractor that is used to lock both wheels will not disengage. It is almost impossible to turn the traactor while pulling.

Ford 1510 rear end
Parts and Repair
Replies 5 Post by Joel Palmer

The crisis is over, I have the tractor running. It would probably be much easier with a manual. Thanks Jimbin, I had a friend call me back and explain the procedure to me. Went easy....

Emergency Changed fuel filter and tractor wont start
Parts and Repair
Replies 4 Post by Paul Elkins

Thanks for the pointers DP. I'm at 27HP, Hydro. Real happy with the ultra slow speed in low range.

3 point trencher
Operating and Attachments
Replies 8 Post by KlayW in MI

Do the Boomer TC-35D or 40D have separate levers for engaging the mid and rear PTO? The only 35D and 40D I have seen have are ones without a mid PTO.Thanks<br>

TC35D or 40D Mid PTO Engagment
New Holland Tractors
Replies 4 Post by Dave Barber

Follow-up message. To install a Boomer temperature gauge see Boomer/Temperature Gauge on this board through the Search The CTB search engine.

TC29D shifting and temp gauge
New Holland Tractors
Replies 11 Post by Thomas M. Meza

I recently bought a TC33D (33HP) and the dealer "threw in" a Bush Hog Razorback rotary mower for $495. My problem is that I have broken about six shear pins mowing 2" or less brush. I have to admit I have hit larger pieces but for the most part it is the 2" stuff or less. <br>Is this a common problem or do I have too much horsepower for the "Razorback" or what?<br>

Bush Hog breaking shear pins
Mowers Field and Finish
Replies 7 Post by tom

Bud, What I heard was a general statement for the 4000 series. The Statement was from a JD mechanic/Shop manager, "the servo pumps have been redesigned to filter out more dust so they will not wear out so quick". David

JD 4700
John Deere Tractors
Replies 4 Post by dsg

The 2WD 790 has an overunning clutch on the PTO so the implements will "freewheel" when you push in the clutch. The 4WD has a 2 stage clutch (also can be called live PTO). Halfway down clutches the tractor, all the way down clutches the PTO. It is very handy when you need to halt foward progress of the tractor using the clutch but still want the implement to be powered (such as when you are crunching up huge amounts of brush in a rotary cutter)

JD 790 PTO Question
John Deere Tractors
Replies 7 Post by Rob Munach

Please price a 5 ft. rotory cutter for a JD 790, 30hp gross, 25 hp PTO. Tannks, John.

Woods closeout sale
Operating and Attachments
Replies 16 Post by John Weaver

I think one of things that you pay for when you get the higher priced implements is proper assembly and instructions. I have the King Kutter 5' tiller and I am not sure what language the instructions were supposed to be in but it wasn't the English I knew. Speaking of crankcase oil, they said to fill each crankcase 1/3 full. On one there is a drain plug that I believe is set at 1/3 but on the other there was no way to measure it except with a stick in the crankcase. Does anyone have experience with this?

king kutter rotary mower questions
Mowers Field and Finish
Replies 7 Post by droz

The NH 2120 is a very sturdy tractor. Its success is evidenced by the fact that it has not been discontinued, but is still offered along with its new generation, the TC40 and TC45. The 12X12 Hydraulic Shuttle Shift transmission option is the ONLY one to consider. Extended clutch life is virtually guaranteed because the shuttle can be used to start, stop, and change direction. The multiple-disc wet clutch packs in the reverser will far outlast the dry disc clutch, given the same # of cycles. The matching backhoe and loader are built to easily handle the tractor's capabilities. Transmission, hydraulics, and rear axle all draw from a common sump. Bradco makes an ultra heavy duty backhoe with full-frame subframe for both loader and hoe. This set-up can also employ a crankshaft- mounted hydraulic pump and external reservoir. This rig is designed for commercial use, and is priced accordingly. Sims and Curtis are the two major suppliers of aftermarket cabs, I am not impressed with either. Laurin out of Ontario, Canada makes a very nice ROPS cab, though I have never seen one on a 2120; and they are considerably more $ than the other 2.

SABOROSKI
New Holland Tractors
Replies 6 Post by RickB.

My Bushhog SQ600, 5 ft rotary cutter is rated as light duty with a 1" cutting capacity. We use it on a 25 pto HP JD 790. The construction is definitely much heavier duty than a Howse or similar. Bushhog's specs recommend 25 HP min. We have cut some 2" stuff with it but it bogs the engine down (and sounds like it is gonna break the cutter). Cutting tall thick grass at a fast pace will also bog the motor down. I think it is about perfect size for my tractor. 6 ft. sounds too big for your HP unless you like taking your time. I also thought it may be too heavy for my 850lb rated 3 pt hitch, but it does not seem to have a problem picking it up.

6 rotary cutter too big
Mowers Field and Finish
Replies 18 Post by Rob Munach

Jerri, I ordered a copy of a operators manual for a 5030 Allis chalmers. It is a tractor made by Hinomoto. The 5030 is a 2 cyl diesel 26 hp, where mine shows to be a 32 hp. If the manual does'nt help me, I may ask you for the readings.

Thanks Shelby

E-25 Hinomoto trans-hydraulic quantity
Hinomoto
Replies 7 Post by Shelby Crawford

On Tractors the centering of the hydro is done externally or there is the ability to do it outside. If the problem is not external than it is internal. You have something that is loose and allowing it to float between forward and reverse.

855 hdro creeps
John Deere Tractors
Replies 6 Post by Art White

Tom, I don't know who's brand you are looking at for the b'hoe to give you two spec's. I looked at the lines I carry and they give break outs on the hoe. The break out capacity on the hoe is what is most critical for output of the hoe. If you never hit the breakouts on the hoe of coarse it will have less stress and last longer between major maintinace.

Breakout Capacity
Loaders Back Hoes
Replies 7 Post by Art White

For Sale: 1988, bought new in 1990 JD 755 4WD Hydro with 799 hrs. mid and rear pto's, 3ph, turf tires, #52 loader with new 60" HD bucket and level rod indicator. JD 60" belley mower with new belt, mower has approximately 370 hrs. JD #413 rotory mower, bought new in 1998 and has aprox. 60 hrs. on it. All is in good condition, asking $11,500. Delivery available, located in Maine. e-mail dsg@ct1.com or ph# 207-565-8980 David<br>

JD 755 Compact tractor FOR SALE
John Deere Tractors
Replies 1 Post by dsg

I would like to hear any comments (positive or negative) on a 12/12 SyncReverser for A John Deere 4300. I am planning on buying a new machine. Thank You.

12 12 SyncReverser on John Deere 4300
John Deere Tractors
Replies 2 Post by Chris

I have not noticed this problem on my 4400, but I do remember this happening on the fram tractors. It is caused by a small internal leak. With the 3 pt. controls seup to automatically keep the 3 pt. at the set heigth, when the hitch settles a small amount it raises it back up to the lever setting.

3 Point Hitch Hydraulic Cycling
John Deere Tractors
Replies 7 Post by Chris in IN