Go Bottom

Sawsall or Angle Grinder which do Prefer

View my Photos
Unclebob
Join Date: Feb 2021
Posts: 10 New England
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2021-02-11          200021


I bought a sawsall many many years ago and have used it on many occasions.

But then a few years ago I had a project that would best be done by an Angle Grinder.

Now I almost always grab the angle grinder for cuting metal. The vibration of the sawsall is just too intense.





Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sawsall or Angle Grinder which do Prefer

View my Photos
Fatguys
Join Date: Oct 2017
Posts: 15
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2021-02-14          200032


Hey Bob,

Those are very different tools for sure.

I recently was working on some sheetmetal and the angle grinder was the tool of choice.

I think which one you use can depend on the amount of vibration the the target item to cut will generate is th emain issue for choosing which one.

Sadly it usually I do not figure that out so good ahead.
....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Sawsall or Angle Grinder which do Prefer

View my Photos
tipoblanco
Join Date: Jan 2018
Posts: 33 ernul,nc
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2021-02-15          200037


Both have their place in my shop,had to cut spring perches off an axle tube and not very good for a sawzall but a grinder i can cut them off and grind the welds,in a tight spot and to say cut a bolt off you cant get a grinder to a sawzall so its like 2 different animals,really need both for the shop ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login