Go Bottomclutch adjustment
 | nannie1943
Join Date: Mar 2018 Posts: 8 Albany la 
|
2018-03-25 197613
My massey ferguson won't move when I put it in gear. Ha a new clutch and pressure plate put on about6 months ago. proable needs adjustment. can someone tell me how to adjust
Reply to |
Quote Reply |
Add Photoclutch adjustment
| BigBoyBob
Join Date: Oct 2016 Posts: 21
|
2018-03-26 197614
Have you checked all the linkage ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| nannie1943
Join Date: Mar 2018 Posts: 8 Albany la
|
2018-03-26 197617
Yes I checked the linkage it is all together after I made post I found out if I put it in the turtle or slow mode it will move but not much power ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| agmonkey
Join Date: Mar 2017 Posts: 9 USA
|
2018-03-27 197621
What model are you working on? Are you still having problems? ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| nannie1943
Join Date: Mar 2018 Posts: 8 Albany la
|
2018-03-27 197622
mf 1533 ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| agmonkey
Join Date: Mar 2017 Posts: 9 USA
|
2018-03-27 197623
Still having problems? ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| nannie1943
Join Date: Mar 2018 Posts: 8 Albany la
|
2018-03-27 197624
Still having problem Having to put it in the turtle or slow mode to get it to move. But doesn’t have any power ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| nannie1943
Join Date: Mar 2018 Posts: 8 Albany la
|
2018-03-27 197625
Still having problem Having to put it in the turtle or slow mode to get it to move. But doesn’t have any power ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| agmonkey
Join Date: Mar 2017 Posts: 9 USA
|
2018-03-27 197626
You may want to disassemble and make sure you didn't bend the disc during installation. ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| nannie1943
Join Date: Mar 2018 Posts: 8 Albany la
|
2018-03-27 197627
Ok. Thanks ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| arcwelder
Join Date: Mar 2014 Posts: 111 Florida
|
2018-03-28 197630
On my Massey 1245 the rod that runs through to the brakes was sticking.
Check if the clutch pedal is moving all the way up when you let off.
Mine stuck pretty good, with these symptoms.
I put Dextron II ATF fluid in an oiler and spent an hour adding oil and working the pedals. I found that a 2x board strapped to the pedal lets you push and pull.
once free, the clutch worked normally. ....
Reply to |
Quote Reply |
Add Photoclutch adjustment
| nannie1943
Join Date: Mar 2018 Posts: 8 Albany la
|
2018-03-28 197631
Thanks I’ll try that ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This