Go Bottom

Clutch Rebuild on a 2004 HPX

View my Photos
dbergan
Join Date: Feb 2017
Posts: 6 IA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-02-06          196241


Hello,
I am interested in rebuilding the primary clutch on a 2004 HPX Gator. Can anyone advise on how to do it and where to get the parts.
Thanks




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Clutch Rebuild on a 2004 HPX

View my Photos
vaughn45
Join Date: May 2013
Posts: 11 Corpus Christi, Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-02-12          196258


I am in the process of rebuilding a primary clutch off a 2007 or 2008 4x2 gator. Not sure what the internals look like in your clutch. There is a solution for removal in this forum. The only difference was mine was a 17mm thread. There is a tool you can buy but you will probably never receive it. Use the 17mm bolt with 1/2 inch dia. rod 3 and some inches long. If the rollers are flat as mine were I bought drill bushings from CarrLane tooling company. Bronze inserts from a local bearing company. Total cost was approx. 50.00 and some change. Hope this helps. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login