Go Bottom

601Ford Hydraulics

View my Photos
03JD4210
Join Date: Sep 2015
Posts: 9 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-09-18          193727


How do you bleed the hydraulic lift system on a 1957 601 Ford? I got in a ditch, ground gave way under rear tires and I slid down in a ditch. After I got the tractor out the 3 pt lift arms would not work.



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



601Ford Hydraulics

View my Photos
03JD4210
Join Date: Sep 2015
Posts: 9 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-09-18          193728


....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



601Ford Hydraulics

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2015-09-19          193740


I pray no one got hurt. We had a 61 601 and not aware of any way to bleed the system other than raising and lowering the lift. Is it possible the pump was damaged due to hot being able to pick up and oil? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



601Ford Hydraulics

View my Photos
03JD4210
Join Date: Sep 2015
Posts: 9 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-09-19          193742


Quote:
Originally Posted by kthompson | view 193740
I pray no one got hurt. We had a 61 601 and not aware of any way to bleed the system other than raising and lowering the lift. Is it possible the pump ...


No one hurt and I turned off engine as soon as it stopped sliding ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



601Ford Hydraulics

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2015-09-21          193752


That is good. Boy need old memory here but think there is speed control on the side of the transmission that may have gotten moved with slide. Also try to see if the draft or position lever was moved out of position. Sure you have checked the fluid level but I would try draining a little to see if the fluid looks fine and not contaminated. I think there is a screen filter there for the pickup but not sure. There were two things I did not like on the 601, the brakes were tough to keep working and not having an overrun clutch both caused me concerns around such as ditches especially when using bushhog. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login