Go Bottom

pto problem

View my Photos
rozijr
Join Date: Jun 2014
Posts: 3 forsyth ga
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-06-19          190484


I have just purchased a cub cadet tractor model 7254 4wd. I cannot get the pto to come on.I push the button and nothing happens. I also can't find a service repair manual. Will someone please help.




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



pto problem

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2014-06-19          190486


Do not know this tractor but some quick thoughts:
Are you seated on it when you are doing this? Safety switch probably requires that.
Have you looked for blown fuse?
kt ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



pto problem

View my Photos
rozijr
Join Date: Jun 2014
Posts: 3 forsyth ga
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-06-19          190487


The service tech at cub cadet says there is no fuse .yes I sit on seat. A light comes on in the dash but nothing happens. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



pto problem

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2014-06-19          190488


Is this an electric clutch? Is so do you have any way to test to see if current is getting to the clutch? Realize you know to test that only with engine off.
kt ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



pto problem

View my Photos
3rdbase
Join Date: Feb 2014
Posts: 5 Connecticut
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-06-20          190494


I have a Cub Cadet 5234D. After each use, I use my blower to clean the machine. Periodically, I have a similar problem. After starting the tractor, everything seems normal except that the battery light remains on, and the PTO will not engage after pressing the PTO ignition button.

My solution works every time.

1. Disconnect the negative battery terminal.
2. Wait 30 seconds. I take this time to clean the terminals and the top of the battery.
3. Re-install the battery terminal.
4. Start my machine.
5. Everything works as if it were new.

The above works for me. I hope it works for you. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login