Go Bottom

John deere 4600 rear scvs

View my Photos
dcraytor
Join Date: Jul 2012
Posts: 3 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-07-20          184374


I recently bought a john deere 4600, that was supposedly setup for a backhoe, though it's not there.

I have 4 hyraulic ports on back, with hose connecting left 2, and the others with caps. There is a single scv lever, that seems to control one or both, not sure.

I want to get a box blade with hydraulic rippers, and use these ports.

Question is, will it work with the scv lever on the fender?...Thanks....Dan




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John deere 4600 rear scvs

View my Photos
jdgreen
Join Date: Jul 2003
Posts: 232 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-07-20          184375


The left couplers with hose connecting should be your power beyond. That would operate your backhoe. The other two couplers should work with your fender mounted scv lever. Yes it should work with your box blade. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John deere 4600 rear scvs

View my Photos
dcraytor
Join Date: Jul 2012
Posts: 3 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-07-21          184380


Thanks JD for the quick reply and infomation, I'm learning as I go and grealy appreciate it....Dan ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login