BH75 Kubota Back-hoe On GL3240
hunelmea
Join Date: Nov 2008 Posts: 8 Cordova, TN |
2008-11-18 157967
Anyone having leak down problems w/this back-hoe? Mine, purchased new in June '08, has been in the shop 4 times and nearly all of the valves have been replaced. All cylinders on the BH creap down, especially the boom. Probably due to weight.
Reply to | Quote Reply | Add Photo
BH75 Kubota Back-hoe On GL3240
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2008-11-18 157969
I think the better way to phrase that question would be does anyone have a B/H (of any brand) that DOES NOT creep down?
Join the crowd.......
Best of luck. ....
Reply to | Quote Reply | Add Photo
BH75 Kubota Back-hoe On GL3240
hardwood
Join Date: Dec 2002 Posts: 3583 iowa |
2008-11-18 157972
My #48 Deere has always slowly let the stabilizers partway down in a day or two. I always rest the bucket on the ground or put the lock up pin in when I park it so I don't know if the boom leaks down or not. I never figured it really mattered. ....
Reply to | Quote Reply | Add Photo
BH75 Kubota Back-hoe On GL3240
hunelmea
Join Date: Nov 2008 Posts: 8 Cordova, TN |
2008-11-18 157974
This one creaps down quickly while working the tractor. It's a pain that you have to constantly reach back and raise the boom and then the seat switch cuts off the engine. Always happens at the most inopportune time. ....
Reply to | Quote Reply | Add Photo
BH75 Kubota Back-hoe On GL3240
hardwood
Join Date: Dec 2002 Posts: 3583 iowa |
2008-11-18 157975
OK, that is excessive, mine will settle a couple inches while driving home from a job, 15-20 minutes. ....
Reply to | Quote Reply | Add Photo
BH75 Kubota Back-hoe On GL3240
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2008-11-18 157982
Somethings funny there, a) that is a little much, and b) if it's been in the shop why did it not cure it?
Have you done any testing to see where it's leaking past the seals?
It's an easy one to do yourself, no special tools or anything.
Best of luck. ....
Reply to | Quote Reply | Add Photo
BH75 Kubota Back-hoe On GL3240
hunelmea
Join Date: Nov 2008 Posts: 8 Cordova, TN |
2008-11-18 157983
Son't see any external leakage. Think it must be in the valve body and leaking back to the reservoir. ....
Reply to | Quote Reply | Add Photo
BH75 Kubota Back-hoe On GL3240
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2008-11-18 157986
Not necessarily, in fact in my experience 99% of all leaks are internal, but usually in the cylinders themselves.
Usually the valves are rated much higher than the valves, so when you over-load the B/H the cylinder seals go first.
Best of luck. ....
Reply to | Quote Reply | Add Photo
BH75 Kubota Back-hoe On GL3240
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2008-11-19 158008
Murf does have it right!! ....
Reply to | Quote Reply | Add Photo
Go Top
Share This