Kubota BX Hydraulic Control Lever
lbrown59
Join Date: Posts: 1 |
2007-11-15 148303
BX Hydraulic Control Lever ?
--------------------------------------------------------------------------------
Lever does not return to the neutral position like its supposed to after lifting or lowering an implement.
What's the fix for that problem?
Reply to | Quote Reply | Add Photo
Kubota BX Hydraulic Control Lever
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2007-11-15 148304
Have you tried some lube on the linkage? ....
Reply to | Quote Reply | Add Photo
Kubota BX Hydraulic Control Lever
s chrand
Join Date: Aug 2004 Posts: 77 Mid-Michigan |
2007-11-15 148309
In your manual, it describes how to make this adjustment. Basically, there is a rod under the seat on the right side that has some adjustable stops on it. You have to adjust them so they force the lever back to the neutral position at the end of the travel for the 3 point. If you lift the seat and watch how the rod moves when the 3 point is raised and lowered, it should become obvious what to adjust and to where.
Good Luck ....
Reply to | Quote Reply | Add Photo
Kubota BX Hydraulic Control Lever
WhitleyStu
Join Date: Mar 2006 Posts: 27 Northeast Indiana |
2007-11-17 148367
After tilling and getting the linkage area very dusty and dirty I wash off the linkage and lube it. This fixes the problem...
Stu ....
Reply to | Quote Reply | Add Photo
Go Top
Share This