Kubota BX2230 Temp Guage
bvance
Join Date: Jul 2004 Posts: 280 The Great Pacific NorthWet, Olympia, WA Pics |
2007-10-17 147087
Hi Guys,
I have noticed lately that the temp gauge on my BX never registers above the minimum level even when I have been working it fairly heavily on a warm day. Is that usual for this model?
The gauge is your typical analog display with a needle that goes from low to high, but the needle never goes above low and appears that it never gets off the peg. Do I have a faulty gauge or do these models just run "cool" and rarely register in the "normal" range?
Thanks,
Brian
Reply to | Quote Reply | Add Photo
Kubota BX2230 Temp Guage
WhitleyStu
Join Date: Mar 2006 Posts: 27 Northeast Indiana |
2007-10-18 147121
Brian,
My temp gage needle never rises more 1/8" into the dark area on the gage face even when tilling in hot weather. Also, I have had to replace the wire that goes from the electrical harness to the sending unit. The connector broke off the factory wire so I made it a little longer then put a new connector on it.
Stu ....
Reply to | Quote Reply | Add Photo
Kubota BX2230 Temp Guage
bvance
Join Date: Jul 2004 Posts: 280 The Great Pacific NorthWet, Olympia, WA Pics |
2007-10-28 147464
OK....I did what I should have done before I posted this question...and that was check the wire connection to the sensor. It had jiggled loose. Crimped a new connector on it and guess what? The temperature gauge now works!
I had considered that the connection had come loose at the gauge end, but that appeared to be a bit difficult to get to. But had not even considered that it could have come loose at the sensor end, which is probably more likley.
Problem solved.
Brian ....
Reply to | Quote Reply | Add Photo
Go Top
Share This