Go Bottom

adding a horn and extra lights

View my Photos
JD2210can
Join Date: Aug 2004
Posts: 8 Ontario Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-04-11          127551


I have a 2210 and want to add a horn and extra lights.
was wondering if anyone has added extra circuits to the electrical system. I figure i would just take a line off the battery and put a in line fuse. Or create a extra fuse block
any ideas would be great.




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



adding a horn and extra lights

View my Photos
Iowafun
Join Date: Jul 2004
Posts: 955 Central Iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-04-11          127558


I can't speak to a horn. But for extra lights mounted to the ROPS, look at the wire harness behind your seat for leads already in place for lights. My 4310 had that built into the wire harness. Sure makes it easier than adding a new circuit. Mine was behind the seat above/around the 3pt area. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



adding a horn and extra lights

View my Photos
bmeyer
Join Date: Jul 2004
Posts: 175 Central Wisconsin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-04-11          127566


The 2210 has a connector at the rear of the seat. It can be used to run a set of back-up lights. It is controlled by the light switch on the dash.

My only problem was mating the connector they used. I cut theirs off and installed my own. Look at my pics and you might see a yellow wire cover - that's where the line is.

I recently wanyed power up front fro a sprayer. I could not find a source up under the hood by the lights. I would up drilling a swutch into the dash and running a line up to the battery as you plan to do. It isn't hard, but it is clumsy. An extra socket on the fuse bank would have been helpful.

Berland Meyer ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



adding a horn and extra lights

View my Photos
whiteturbo
Join Date: May 2005
Posts: 77 Shelby NC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-04-12          127589


My 3520 has the wires already installed for the horn. Look nearf the frint top of the radiator and it should have two wires they will go back to the instrument cluster. Just remove it and drill a small hole and the orn will have a push button. Dealer sells the kit that includes the horn and button. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login