Go Bottom790 Electrical Problem
 | Dave Thorpe
Join Date: Posts: 1 
|
2006-01-08 122425
I have a JD 790 with an electrical issue. I have full voltage to the ignition switch but it drops to below 1 volt when switched on. I have ensured that ground is good and I have thouroughly cleaned all connections, etc. I cannot get voltage to the fuse block. What am I missing? Is there some kind of fusable link or something?
Reply to |
Quote Reply |
Add Photo790 Electrical Problem
| jdgreen
Join Date: Jul 2003 Posts: 232 Maryland
|
2006-01-08 122443
There should be a fusible link at the starter. On the same post that the battery cable attaches, another wire attaches also that has two connectors within a foot of that terminal. The section of wire between those two connectors is the fusible link. If all connections are clean and tight, this is a good possibility. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This