Go BottomLong tractor 610 reduction gearbox leak
 | kpack1957
Join Date: Feb 2019 Posts: 2 
|
2019-02-09 198188
Morning all I’m getting leaks in several places on my 610.
My main leaks are the reduction gearbox seal or transfer case.
Then I have a couple of leaks at the bottom of my injection pump. I have the rebuild kit for the injection pump and have put orings in the throttle arms at the top of the pump but somethings dripping at the bottom, I’ve got to clean it up and pinpoint just what’s leaking and identify the part from the parts manual.
Has anybody here rebuilt their injection pump or replaced the seal in the reduction gearbox?
Im trying to figure out how to post pictures for breakdown out of parts manual.
Reply to |
Quote Reply |
Add PhotoLong tractor 610 reduction gearbox leak
| kpack1957
Join Date: Feb 2019 Posts: 2
|
2019-02-09 198189
....
Picture Link
Reply to |
Quote Reply |
Add PhotoLong tractor 610 reduction gearbox leak
| kpack1957
Join Date: Feb 2019 Posts: 2
|
2019-02-09 198190
....
Picture Link
Reply to |
Quote Reply |
Add PhotoLong tractor 610 reduction gearbox leak
| arcwelder
Join Date: Mar 2014 Posts: 111 Florida
|
2020-02-26 198969
There is a hole under the clutch housing on my 2510 that has a cotter pin connected to something inside.
If you are running the trans fluid too high it could be comming out of the shaft housing and leaking out that hole.
Also the holes that are threaded under the trans go all the way through to the clutch housing. Then you may have the hydraulic pick up tube bolt leaking. The bolt is suposed to have a rubber ring to prevent that, on mine it was brittle. I put 2 o rings on it. Be careful tightening that bolt, it is really easy to strip. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This