4110 with 410 FEL and Frontier Box Scrape

Heated Concrete Pour

Steel Frame Barn

Outside walls almost done

Wirsbo tubing for heated floor

Finished front of barn

Staring eye to eye with this buck

Posing for the camera...

Young bucks enjoying the hay

Fawns

FEL mount log splitter in transport position

Log splitter has a 2 inch round tube to insert into the receiver, so it easily rotates from transport, working and storage positions.

FEL mount log splitter

Cylinder has quick removing pins to change the log hight from 24 inch , 30 inch or 36 inch .

FEL mount log splitter

Not much storage space required, and is easily moved.

60MMM mounted on 3PH Horz. position

60MMM on 3PH in vertical position

Belt drivetrain is on the same pivot shaft - so the deck can continue to run while moving the angle of the deck.

60mmm on 3ph

Deck can be rotated from vertical (perp. to ground) to 30 deg. below horz. 3ph is at its highest position for this photo.

The flood

The berm was a little low in a couple of spots, and the water came in...

The Flood

2 inch of rain the day before, then 5 inch came down in about 2 hours.