Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

You may want to check the arch at the box make sure the contact ends are making a good contact with the fuse.

Phillip
Circle G Tractor Sales, Inc.
www.circlegtractorparts.com

Jinma 284 Ammeter 30 Amp fuse keeps blowing
Jinma Farmpro Agracat Nortrac
Replies 59 Post by Circlegtractors

We have every part IN STOCK for the jinma tractors. The injection pump holds probably around a half cup of oil, take the mushroom shaped cap off the governor at end of injection pump, there are two 10 MM bolts on end of governor about an 1" apart, take the bottom bolt out and pour oil thur mushroom hole until it runs out of bolt hole. Call if you need any help or have questions.

www.circlegtractorparts.com
Phillip, Ben, justin or Sherry
601-252-5272

Farm Pro 2425 Parts Supplier
Jinma Farmpro Agracat Nortrac
Replies 9 Post by Circlegtractors

A lot of folks think that the new bearing goes into first groove of column, you will more than likely have to cut old racing out so that the new bearing can go into second groove, give us a call if we can help 662-252-5272

Circle G Tractor Sales, Inc.
wwww.circlegtractorparts.com

284 jinma steering column rebuild
Jinma Farmpro Agracat Nortrac
Replies 4 Post by Circlegtractors

We have the rebuild kits in stock,www.circlegtractorparts.com or give us a call at 662-252-5272

Circle G Tractor Sales, Inc.
www.circlegtractors.com

farm pro 2425 steering problem
Jinma Farmpro Agracat Nortrac
Replies 3 Post by Circlegtractors

SPAM deleted.

Fuel Line Problem
Jinma Farmpro Agracat Nortrac
Replies 7 Post by Circlegtractors

SPAM deleted.

Farm Pro 2425 lift problems
Jinma Farmpro Agracat Nortrac
Replies 3 Post by Circlegtractors

SPAM deleted.

3 point problems
Jinma Farmpro Agracat Nortrac
Replies 11 Post by Circlegtractors

We have a new shipment of the 6" woodchippers and parts due to arrive in a couple of weeks, anyone interested give us a call. Circle G Tractor Sales, Inc. 662-252-5272

Jinma 6 woodchippers
Operating and Attachments
Replies 1 Post by Circlegtractors

I would check that quick coupler again going to the hydraulic pump, undo and redo. Sounds like you've got some back pressure not letting the engine turn freely. Let us know what you find. We also have any part you would need.

Phillip
Circle G Tractor Sales, Inc.

Jinma 254 Slow turn over
Jinma Farmpro Agracat Nortrac
Replies 9 Post by Circlegtractors