Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I should add that all the boomer 8N from New Holland from the 2009 time frame have the same pedal. It does not have to be from a 2009.

2009 New Holland Boomer 8N Gas Pedal
Parts and Repair
Replies 2 Post by davidgid123

Happy St Patrick's day

Gerry Connors walked his dog through the village every day.

One day Mr Connors is on his walk without the dog.

His pal Billy sees him and asks: "Where is your dog?" Mr Murphy answers: "I had to have him put down." "Was he mad," asks Billy.

"He wasn't too pleased," Mr Murphy replies

Joke o the day
Just For Fun Off Topic
Replies 73 Post by jobone

On my tractor I get about 7 years, and I wait until it gives me problems before replacing. On SUV's 4 to 5 and I really should just replace at 4 and not wait for issues to opo up before I take action but I never do, I need that click cick sound to stimulate me :-(.

SURVEY How often do you change your Battery
Parts and Repair
Replies 13 Post by DennisCTB

Hi Grayhorse, thanks for answering. Everything is new, correct fluid and full. I have wrenched on Big Trucks & Cats for 50 yrs but this is really starting to get to me. The only thing else I could think of is when they made the two hydraulic hoses, the could have “pealed” a chunk of rubber in the hose. I will pull the hoses next time out to the farm.

MF 135 ps overheated
Massey Ferguson Tractors
Replies 7 Post by Dieselgg

That light is a bell and whistle feature I expect,very cool. But just an indicator that you moved the 4WD lever, expect you may have an issue witht the linkage .

2011 Kioti DK90 4wd will not engage
Kioti Tractors
Replies 2 Post by minimac

I would recommend you email LS they have a site that should be able to get the answer for that.

LS 4155 codes
Parts and Repair
Replies 3 Post by Skyler

On my zetor 6321 I need to know how to adjust clutch fingers on clutch before installing<br>

Zetor 6321 clutch plate adjustment
Other Tractor Brands
Replies 2 Post by farm44

I'm partial to Polaris UTVs

my 2012 570 RZR is all I need

What is the best UTV to buy Polaris or
Utility Vehicles UTV/ATV
Replies 8 Post by charlieK

I remove the deck in the spring to grease my 72" ZD28 and 54" cub cadet decks

Kubota ZD18 lawn mower
Garden Tractors
Replies 7 Post by charlieK

Hi I have the same problem with my tractor just bought at auction its a mitsubishi MT23 did you get yours fixed? If so where did you get the seals from please let me know thx

Hydraulic pump problem
Mitsubishi
Replies 8 Post by Fimbres2311

if loaded is taken out of system,, hoses has to be loop back in system for 3pt to work,,,, I found out the hard way,,lol

MF 1020 no three point
Massey Ferguson Tractors
Replies 2 Post by weasel

Check your hubs carefully; mine have a 'bump' that fits into the open center of the wheel. Your machinist friend will at least need to cut a cavity into one side of the spacer to accommodate the bump.
Up to you if you want to replicate the bump on the wheel side of the spacer. I didn't bother. Instead I cut a hole all the way through the spacer to fit the bump, which was relatively easy to do in aluminum. This will cut the weight down significantly as well, from 37 pounds to 24.

Your machinist friend probably has a paint booth if you're worried about rust.

Cub Cadet 7274 Rear Wheel Spacers
Cub Cadet
Replies 9 Post by chashm

I had that problem and found the linkage had come loose on the shaft coming out of the transmission housing. Also, I believe that the manual says to stop the tractor before trying to engage the FWD.

1983 New Holland 4 WD does not engage
New Holland Tractors
Replies 2 Post by TheCaptain

I noticed this post from you. I have the same problem, three point goes all the way up and down but does not stop unless I manually jiggle the lever. I notice that my feedback arm has some play in it. (it is loose). Is that normal or does the play need to be removed?

thx

John Deere 4105 3 pt problem
John Deere Tractors
Replies 9 Post by daflem

Hello,
I apologize for not posting a followup.
I have a 4200 tractor with the SST synchronized 3 speed transmission.
When I split the third housing I found that the bearings on both ends of the
transmission cluster shaft had worn considerably causing the transmission to only shift and work in 1st and reverse AND only when I pressed hard on the shifter to keep it in gear.
There is the transmission mainshaft with the three forward and the reverse gear and then there is the cluster shaft which keeps all in motion...Almost exactly like a Muncie 4 speed trans out of a 69 zz-28 camaro.
The balls in the ball bearings (RUSSIA MFG by the way) were worn almost in half of their original diameter. This caused the shift forks to be out of alignment and to not allow shifting into 3rd and second gears.
I fixed the bearings and found new used synchronizer "brass Rings" at an automotive transmission shop.
The clutch appered to be just fine so all was cleaned and reassembled and the trans works great now. Although it is a synchronized transmission I will not upshift it on the fly ...Just because I do not wish to take it apart again.
regards gary

John Deere 4200 clutch shifting hard
John Deere Tractors
Replies 11 Post by garyrnorth

I�m also having this issue and looks like the seal is bad. Do you have a YouTube video on this or some pictures on replacement. Where would I go for replacement seal other than direct to sales counter kioti?

Kioti dk45 steering leak
Kioti Tractors
Replies 22 Post by Conor1

There is a 4010 row crop tractor and a 4010 compact. I assume you mean the compact. The part numbers don't match, so the wheels are different. They may have same bolt configuration and may bolt on, but I can't find specs on 4100 wheels to know for sure,

Do JD4100 wheels fit the JD4010
John Deere Tractors
Replies 3 Post by jdgreen

Hydraulic Fluid, something like the 134 Ford fluid. Japanese have different terms for hydraulic fluid.

Fluid to use in Hinomoto
Hinomoto
Replies 21 Post by lee4519

I wonder if the wiper arm couldbe installed in the wrong position. On many cars there is a master spline that prohibits this from happening and maybe Curtis likes the wiper in that odd spot :-(

Curtis Cab Wiper
Parts and Repair
Replies 2 Post by Skyler

[QUOTE=mikemoyer;200876] I am working on a 48 cub with 6 volt system is it positive ground? [/QUOTE]

YES

1948 international Cub 12 volt or 6 volt Positive Ground?
Tractor Projects
Replies 6 Post by charlieK