Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Nautical is correct, the B21 was only sold as a TLB (Tractor Loader Backhoe) and was a bit of a Franken-tractor.

Kubota wanted a small commercial machine and so picked & chose amongst components from various machines of that size to come up with a package which was assembled out of only the most robust pieces they could find.

Will it fit? Yes, but not without some customizing & (re)fabricating.

What part of Cannuckistan are you in there neighbour?

Best of luck.

Compatible Backhoe for B2630 2007 Question Will BT751 back hoe fit
Loaders Back Hoes
Replies 4 Post by Murf

I have a Shibaura sd 2243 and recently had to open the hydraulic system when I replaced the starter. Now i can't get any flow to my front end loader. The hydraulic gear pump mounted on the left side of the engine has good flow to and from the rear transmission / 3PTH block but almost no flow to my loader. Checked all of the lines for blockage. Is the pump on the engine just a feeder pump and is there another high pressure pump or is it the only pump in the system? Also cannot get the 3 PTH to raise. Looking for diagrams of the valve block below the seat.

Shibaura SD 2243 Hydraulic system question
Shibaura
Replies 5 Post by trevbenson

I have my Cub Cadet 7260 apart working on a clutch replacement. This is a dual clutch arrangement. If you look on page 141 of the service manual for this tractor you will see that they say to use a CAS2170 height gage to set the height of the bolts that the throw out bearing makes contact with when the clutch pedal is depressed. Now I don't have this CAS2170 height gage tool but the height listed in the specs on page 136 is 3.85"/3.90". The picture on page 141 is not clear enough to see the reference point that the legs of the height gage rest on. If I knew that reference point I could set up a way to make the measurement. Has anybody done this and do you know the reference point? Maybe a clearer picture if anyone could point me to one. Or any suggestions.

Cub Cadet 7260 Clutch Replacement
Cub Cadet
Replies 5 Post by bill18163

Erskine makes snow blowers not sure if they are a supplier for OEM tractor manufacturers.<br>
<br>
Just came across Sheyenne Tooling & Manufacturing, Inc.. They make a front mount blower that attaches to a front end loader.<br>
<br>
Sheyenne shows it on a a Kubota Tractor but does not stipulate what model loaders it is compatible with.<br>
<br>
Might be interesting for those that get mountains of the white stuff and need the ability to get up higher than most sub frame front mowers can to do which is minimal.<br>
<br>

Who Makes Most Front Snowblowers
Snowblowers / Snow Plows
Replies 7 Post by DennisCTB

[QUOTE=mbailey;199975] ... On your other issue with the rock salt being blocked up, the only solution there would be to get the hammer out or just toss it and take the loss. Not sure how your spreading the salt but one bit of advice would be to get a set of rubber coated gloves if your not using a spreader. Your hands will thank you later!! [/QUOTE]

To spread the salt or sand I put a 5 gallon bucket on a had truck, and spread it by hand with a feed scoop. I dropped a hand full in a puddle last night. Yup easy way to get cracked fingers handling this stuff!

Good News :
-after dip to 9 degrees I still have a puddle

Bad News
-the Pellets are still pellets even after spending 18 hours in a puddle
-even stomping on them with my foot still does not crush them
-the car tires having limited impact on breaking these hard compressed blocks of Pelletized salt.

Next steps

-see if I can find a way to crush them without dedicating myself to a lost cause.

If no chuck them!

Thanks for everyones advice really appreciated

Ernie

When is the best time to Apply Salt
Snowblowers / Snow Plows
Replies 8 Post by Ernies

You can almost touch them with your fingers. Yes, 1st / reverse is the front gear.<br>
<br>
<br>
Best of luck.

Massey 261 transmission trouble
Massey Ferguson Tractors
Replies 4 Post by Murf

I must say, when my missus saw the 17" screen in my Tesla the first time she was very shocked at it's size. I like it.<br>
<br>
Mind you, I also plow my driveway with a New Holland TV140 with a 12' plow in place of the bucket. Turning it around is easy, it's articulated!! LOL<br>
<br>
<br>
Best of luck.

How big is Enough LED Dash Info Screens
Autos SUV Trucks
Replies 3 Post by Murf

Preet is a small (fairly new) tractor manufacturer in India, I doubt you'll find any dealers outside of south-east Asia.

The OP is just trolling spam.

Best of luck.

Preet Tractor Models
Other Tractor Brands
Replies 3 Post by Murf

The New Holland BigBaler 1290 High Density has advanced design and enhanced operational efficiency. Operator comfort was a key element in its design.and function.<br>
<br>
Does anyone have a price on these?

New Holland 1290 tractor price
New Holland Tractors
Replies 2 Post by jiyabi

I had studded snows on my '68 Mustang and '70 Nova. Then the highway departments noticed the severe damage happening to the roadways and banned them. Along with that we saw the shift to front wheel drive, then four wheel drive, but most of all the tire companies improved the stickiness of their tires. I had a 2000 BMW rwd that absolutely needed winter tires in winter (I live in Minnesota) but it was important to change for summer as tread wear was not very good, a sacrifice made for snow and ice traction. It was replaced with a 2008 awd BMW and the need to change tires went away.

So they were banned in northern states like MN due to highway damage, replaced by improved tires, traction control, 4wd, front wheel drive.

My studded tire experience was nice for icy roads but horrible once winter was over as the carbide studs on asphalt spun easier than a broad full rubber contact.

Does anyone use studded tires anymore
Autos SUV Trucks
Replies 3 Post by MHarryE

Thank you, Murf. I will be cautiously optimistic!

Brad.

ZETOR ZEBRA 2040 4WD Reviews Buying Info
Articulated Tractors
Replies 104 Post by Trfcrx7

Steering does not work when PTO is engaged the tractor was rebuilt after Hurricane Harvey in Texas (wo insurance coverage).The orbital valve was found to be taken out by a shady mechanic and not put back inside! The MF dealership priced a brand new valve for $1500 and all they/I really need is the ball size so that we can simply replace. Looking and calling manufacturer and elsewhere we cannot locate this info and do not have another to compare to... ANY help would be a blessing. THANKS

2005 MF 431 2WD orbital valve question
Parts and Repair
Replies 3 Post by GTC007

It sounds like one of two possibilities.

The solenoid is shot or the wiring to it needs cleaning up. I'd start with cleaning up all the connections, especially the grounds. A bad connection will limit the current and cause exactly what ou're describing.

Best of luck.

Komatsu WB140 F
Loaders Back Hoes
Replies 2 Post by Murf

Cub Cadet 6284 Reverse Flow AdapterWon t Work
Cub Cadet
Replies 2 Post by BeenThere

�I have an old Kubota B7500 that I am looking to replace. Just started looking at the new deals the 2025 and the 3025 wondering whether the 3035 is more like what I am used to with my B7500.<br>
<br>
Looking for reviews of Series 2 and 3 John Deere Compact Tractors

Anyone have a John Deere 2025 or 3025 Tractor
John Deere Tractors
Replies 2 Post by Bitte123

This fall I did some outside painting and found that the best thing to use was my Painters Tool. The edge was duller than a putty knife so it could loosen flaking paint without gouging. It was just the go to tool, the only thing I used for the entire job. A must have tool.

Things you should have in your toolbox
Shop Tools
Replies 5 Post by gravely

This was a pretty neat idea.

But honestly in the 12 years I have had them I only used them in year one and 2. Then I found a nice place to roll the deck and have never even thought of using them since, not sure even where I put em :-(

REVIEW -- Mower Deck Axle MMM stands
Mowers Field and Finish
Replies 6 Post by DennisCTB

It is not a bad machine at all. But the price needs to be great, and you need to be better than average mechanically to keep her going.

And you need to be willing to rummage for parts. JMOO

Is Belarus a reliable tractor?
Belarus
Replies 2 Post by Nautical

I consider myself to be handy, but after looking at this leaking seal video I feel that I would be reluctant to try it. I would not want to botch it up.<br>
<br>

Replacing Front Axle Seals Kubota B7500
Kubota Tractors
Replies 6 Post by monday

my first tractor bought in 2001 if i remember was a used Cub Cadet 7274. great tractor did a lot with but every year it was in the shop for a month for repairs and dealer X had to wait for parts.It was a lot of hidden problems waiting to surface. especially electrical....wife said No more used ..so Traded in for a new NH TC33 in 2004, with a new dealer B, relatively problem free till this last Oct when brush hogging a field (done dozens of times before) a buried branch got kicked up by tire rolling over it, cracked a hydraulic line and filter housing.. dealer came got it and repaired in a week Dealer B told me they will be "authorized " to servicing NH items with parts for only two more years, as NH is changing it dealer support methods and requirements and local dealer mgmt is not in tune with NH recent behavior and requirements, so a parting of ways. So if i needed NH servicing dealer it be 1.5hr + drive versus 30 minutes. Dealer said they would still work on my tractor but parts support would be delayed. So I bit the bullet and traded in the NH (780hrs) for a Kubota LX3310 as they have carried the Kubota line for eons along with other major equipment lines,MF, AGCO.., I ve had a real good working relationship with this dealer (sales, parts,service) and ive come to trust them . someone mentioned fewer electronics on smaller tractors.. that might be true on some-- But this new LX3310 just about has as many buttons and warning icon lights and buzzers as my 2018 Car. ;-/ :-) Still taking sometime to get use to all that electronics

How often to Buy New Kubota Tractor
Kubota Tractors
Replies 5 Post by Woodie