Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Thanks for your advice, turns out that whoever made that batch of lift pumps for AGCO all had problems. I assume that holes formed in the rubber bladder and they would stop pumping fuel. I went through three lift pumps before the dealer got a new batch and the first one worked just fine/

Tractor was running and will not restart
Massey Ferguson Tractors
Replies 5 Post by poapony

amazing on both points...I will be the typical amateur and over engineer...lol

Have too look at holes I can use but plan to make a metal bracket to either pin or bolt to tractor for torque and movement.

PTO shaft mounted pump
Tractor Projects
Replies 16 Post by kthompson

Ok. thanks I will check them.

Starter sometimes clicks but won t start AMT600
Utility Vehicles UTV/ATV
Replies 20 Post by noglu10

Recieved Duerr 678. Came from small engine scrap heap, dead enging but fairly good frame. I need a parts breakdown and/or service manual so I can open this unit up and evaluate its worthyness.
If it is worth buying a Honda engine and refurbing rest of machine i will do so., or it will become parts .
Where can I get manuals in PDF format ?
Im new to this site so Ill learn as I go

Duerr hp 678 Chipper Manual
Operating and Attachments
Replies 33 Post by Tntrader

ahhh that makes sense! Thanks for the information

2000 6x4 gator Spreader bar between engine and tranny
Utility Vehicles UTV/ATV
Replies 4 Post by pposey

Typically blue smoke in a diesel indicates unburnt oil not fuel. If the exhaust is spitting liquid of any kind that indicates something is not being burned.

If you have both blue smoke and oily stuff being spit out the exhaust that generally indicates you have motor oil making it into the cylinder. That is not good. It could indicate a bad cylinder / possibly broken piston ring.

Does the engine sound normal? Is it reaching normal running temperatures? Is it making normal power?

Best of luck.

Belarus 800 series
Parts and Repair
Replies 3 Post by Murf

duplicate post

gator 550 xuv exhaust problem
Utility Vehicles UTV/ATV
Replies 2 Post by kthompson

If this is happening while it is being driven I suspect you have leak in the exhaust system. If while sitting still then would try to extend the exhaust. I still would check for leak in the system.

Bad exhaust smell on Gator 550
Utility Vehicles UTV/ATV
Replies 3 Post by kthompson

Not sure our gator is same model but have you tried pulling it (the lever) up while depressing the release button? If that does not work makes me think something is come lose or broken. Can think of no problem with using a lubericant to spray now the lever around the release button.

Parking Brake
Utility Vehicles UTV/ATV
Replies 2 Post by kthompson

greyhorse has posted a new photo.

Subject: Avatar Ford N.

Description: <br>Ford N

Avatar Ford N - New Pix by greyhorse
Photos
Replies 1 Post by greyhorse

For our last and most sigificant snow I used this awesome tool to deal with it.

S no problem
Articulated Tractors
Replies 3 Post by DennisCTB

It sounds like a revolution Clunk like when something rotates Then Clunk Rotate again clunk I moved it in the garage today, and it was like "locked up" reverse pedal freed it and then clunk... clunk... Clunk all within 30 ft Thank You Got underneath U joints seem good Greased the hell out of them didn't matter

Cub Cadet 5254 4Wd Driveline Clunking Noise
Cub Cadet
Replies 12 Post by ford15000

Murf has posted a new photo.<br>
<br>
Subject: Snow problem!. <br>
<br>
Description: It Makes a bit of snow a small problem.

Snow problem - New Pix by Murf
Photos
Replies 1 Post by Murf

Thanks for the response. As soon as the weather clear I will give it another go.

mf50a hydr steering problem
Massey Ferguson Tractors
Replies 3 Post by Latino

One possibility is you have air in the system, check all hydraulic lines for wear and connections

TD5050 Hydraulics not working
New Holland Tractors
Replies 2 Post by minimac

Dennis,

Drill a hole in the fan housing directly in line with the shear pin hole and then spin the fan and shaft into alignment and use an extra long punch right down though the hole from outside the housing. A pipe wrench on the driveshaft and a block of wood to jam the fan works good for us.

Best of luck.

Kubota BX2750 Snowblower Fan Shear Pin Alignment
Snowblowers / Snow Plows
Replies 11 Post by Murf

[QUOTE=Jdeere4210;196097] I feel that since there is not much resistance on the lever that it is probably something inside but I don't know what to try next. Any help would be greatly appreciated. [/QUOTE]

I don't know about that unit in particular, most of my tractors are Orange not Green, but the up / down 3pth control lever on most tractors is a round rod that goes through the transmission / differential housing with a threaded hole in the end of it. The lever you grab to move the arms is bolted into that rod. If the bolt or other connection comes loose, the result is exactly what you describe, no resistance on the lever and no motion in the 3pth.

Get underneath the tractor, with the engine OFF, and have a helper move the 3pth lever back and forth and ensure that the entire linkage is moving, not just the lever.

Best of luck.

John Deere 4100 gear 3 point not workin
John Deere Tractors
Replies 3 Post by Murf

My CASE DX25E (a close relative to your tractor) has the following fuse block: (From left to right standing on the left side of the tractor looking down at the split fuse block, forward to back)

15A Hazard/Horn
20A Alternator/Headlights/Taillights
25A Instrument Panel/Turn Signals/Fuel Pump

5A Safety Control/Brake switch
-- Empty circuit
-- Empty circuit

There is a separate 40-amp fuse (in own fuse holder) between the Starter and Alternator that protects the entire electrical system.

Hope that helps some.

Tc29da
New Holland Tractors
Replies 2 Post by bloggins

I can't recall if it will flow on its own there. If you have a rubber hose between the tank and pump then you can pinch it off. Spray the shut off at the tank with penetrating fluid and you should be able to work it slowly loose. Its always good to have this working.

Belarus 420A - Problems bleeding Injection Pump
Belarus
Replies 4 Post by cowrider

It should be, I have a 336d and I think that was plenty, just start the tractor and put the joy sticks in middle position when you check the dip stick.

Yanmar 1500D hydraulic fluid change
Yanmar Tractors
Replies 4 Post by dualhvision