Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I have a mint 6200HST that I'm considering putting a loader on. Other than the 1640 or 1630 I'm wondering if there is a way to find if other kubota loaders are compatible. Any input would be greatly appreciated.

Kubota B6200HST Compatible Loader
Loaders Back Hoes
Replies 3 Post by KubotaMike

Could mount a couple rear view mirrors so your neck don't cramp up

Best Snowblower for Yanmar Compact Tractor
Yanmar Tractors
Replies 8 Post by dualhvision

Thanks so much. I appreciate the insight. I will be getting the actual hours of service and some pictures this week from my dad and will add that information to the post next week in hopes of narrowing the price down for him.

Thanks again.

Kubota 7200 - market value
Kubota Tractors
Replies 8 Post by vpaf2010

I have a 2005 790 that I want to put a heater on. Do I need the JD OEM adapter kit to go with it? I'm not even sure what it's for, but a few other forums I have seen have mentioned it.

790 Block Heater
John Deere Tractors
Replies 4 Post by Damrockfarm

After replacing the electric fuel pump I found the pick up line screen collapsed and kinked. Replaced it and now the pump won't prim the line. I have actually fed gas into the line to the pump and all it does is push it back to tank like it is pumping in reverse.<br>
Lost in Ohio over this debacle. It started after I shut it off one morning and tried restarting it. I heard a slight pop and the battery was dead. Figuring it was the battery cell which was 7 years old I replaced it. Here are the list of parts I have already replaced. Electric fuel pump. pick up line, fuel filter and battery.<br>
Thanks in advance for any help.

Trouble shooting no fuel in lines 620I XUV after replacing elc pump
Utility Vehicles UTV/ATV
Replies 2 Post by gettxman

Hydraulic excavator is the best digging tool, which are used to excavate materials above or below the bearing surface of the machine. It has become one of the main construction machineries in engineering construction. Daily maintenance is an effective way to extend its service life. Daily inspection is very important to ensure the digger to work durably and efficiently. For the self-employed, the daily inspection helps reduce maintenance costs. Here are some guidelines about the digger daily maintenance that may improve your digger�s working efficiency.<br>
<br>
Firstly, the operators should walk around the digger twice to check if there is something wrong with the chassis, and check if there is fuel oil leaking from the slewing bearing, and then the brake deceleration device and track bolt fastener. For a wheel hydraulic excavator, the operator also needs to check whether there is something wrong with the tires and its pressure.<br>
<br>
Secondly, you need to check whether the excavator bucket teeth are abraded, which will greatly increase resistance in the process of construction and reduce the working efficiency.<br>
<br>
Thirdly, it is an important issue to choose the right diesel oil. The type of the diesel should be chosen according to the ambient temperature. The diesel should not mix with impurities, dust and water, otherwise, it will cause wear to the fuel pump and damage the engine of the hydraulic excavator. Open the oil drain valve to draw off the water before daily operation and fill the fuel tank after the inspection. The air in the pipeline should be removed after the fuel in the engine is used up.<br>
<br>

Excavator Daily Maintenance Guidelines
John Deere Tractors
Replies 3 Post by optionals

Hello,
New to this site, May I ask if I can also recieve a e-mail for the Duerr 8 hp 678 Manual. My neighbor just give me his father-in-laws machine and for a winter project I want to rebuild/restore it next sping.

Thanks everyone,

KhunJeff

Duerr hp 678 Chipper Manual
Operating and Attachments
Replies 33 Post by KhunJeff

I have a d1600 with only 200 hours on and everything was perfect on the machine until a limb broke the front grill. I do not seem to be able to find the part anywhere. Can anyone help???

d1600 grill
Mitsubishi
Replies 5 Post by skippybob

Well I'm new here and just bought a Belarus 562. Does anyone know why my steering is locked? If you take the hydraulic line off the steering cylinder the steering wheel will turn.

562 steering locked
Belarus
Replies 1 Post by Cwmarsh

You could start by checking hydraulic oil level. Clean the hydraulic oil filter. Then check system pressure by hooking a gauge to the output.

825 Belarus three point hitch INOP
Belarus
Replies 4 Post by morant

My tractor is smoking light blue smoke when running and popping back through the muffler every once in a while. Oil appears at the base of the muffler. I adjusted the valves by the book and it got better but still doing this.

Belarus 800 series
Parts and Repair
Replies 3 Post by morant

Email me at parts at sheaftractor.net. I should be able to get you the parts you need.

Toyosha cs86 hinomoto c144 Massey Ferguson 1010
Massey Ferguson Tractors
Replies 3 Post by lsheaffer

Try here:
http://www.southern-global.com/engine-parts/pistons-rings

Toyosha cs86 hinomoto c144 Massey Ferguson 1010
Hinomoto
Replies 2 Post by mironb

Ended up taking the tractor to the dealer, the more I bled the system the longer it took and the shorter it would run.

As usual with my luck the lift pump I bought and installed on the tractor was bad. Took the tractor in Monday and they asked if I was using it and I told them yes as I needed it to feed round bales of hay. Dealer said they would get to it asap but they were pretty backed up. Got a Call around Tuesday lunch and said my Tractor was fixed, thrilled beyond belief. I asked what ended up being wrong thinking I had missed something very obvious, that is when they me the lift pump I purchased two weeks ago was bad.

MF 261 ill not restart
Massey Ferguson Tractors
Replies 3 Post by poapony

Are the Hydraulic hoses connected on the control on correctly?

Hydraulic Gremlins
Loaders Back Hoes
Replies 2 Post by minimac

Thanks for the quick reply! I will check out the Yahoo site you have noted. The hydraulic fluid currently on this tractor is AW32, but I am not sure if this is adequate for the power steering; as far as I can tell, the steering and general hydraulics work off the same pump. The previous owner did change the pump which I believe failed due to the 32 oil in warm weather i.e. not heavy enough. I am into cold weather now so the 32 may be ok but I just want to determine what the original spec was for the system. Thanks again and I will go to the Yahoo site.

Lubricants
Belarus
Replies 3 Post by p15cwbm

Thanks, that is what I needed for my 851 Ford, Figured it was a cat 1 but needed to be sure.

Tractor Category 1 2 3 Hitch sizes Defined
Operating and Attachments
Replies 20 Post by Vetter66

Need help. The parking brake lever on my 2006 is locked in the on position and won't release. How can I get the lever to release? Thank you in advance.

Parking Brake
Utility Vehicles UTV/ATV
Replies 2 Post by mtmrecon

Is this the indicator lamp to the right of the 4WD and MotionMatch switches? If it is, what are the "codes?" - is that the number of times the lamp flashes?

If it is not, then what is that indicator lamp to the right of those two switches.

Thx... Roger

John Deere 4310 Indicator Lamp codes
John Deere Tractors
Replies 4 Post by Roger4310

Hope this does not get to long, Tractor MF 261, 2300 hours,4 cylinder Perkins.<br>
<br>
Recently had to replace the fuel uplift pump, fuel line from tank to uplift pump and the filter. Uplift pump was leaking. Bled the fuel system and started right up.<br>
<br>
Next time I used the tractor ran fine for about 30 minutes, was going up a slight hill in a pasture and engine sputtered but kept running. Drove about 50 yards and engine stopped and would not restart. Re-bled the system and started fine made it back to the gate and died again. Fuel gauge read low but not empty, checked the tank and had about 5 inches of fuel. Re-bled the system again and tractor fired right up, next day started tractor and let in run at idle for about 20 minutes with no problem. This was about 10 days ago.<br>
<br>
Went to start tractor today everything was fine used for about 30 minutes and while going down road engine would slow down slightly then go right back to normal speed did this for about a quarter of a mile. Was doing it more up hill than on flat or going downhill. Went to drop off a round bale in same pasture and tractor died and would not restart. Re-bled the system tractor started went to next pasture going up hill and it died again. Got it out of the pasture and tried to re-bled the system twice and will not start.<br>
<br>
To bled the system I loosen the small lower bolt on the injector pump and crank until fuel came out which was right away, then loosened the small upper bolt on the injector pump and cranked but hardly any fuel or air came out. Then I started with the injector closest to the seat and cranked until fuel came out and moved to the next injector. At the third injector the tractor tried to fire for a couple of seconds but would not start. Normally this was the time that it would be running.<br>
<br>
I suspect that my injector pump might be bad as when I bled the injectors the fuel did not seem to have a lot of<br>
pressure. Fuel did not squirt out like when I bled the injector pump.<br>
<br>
Any suggestions would be greatly appreciated.

Tractor was running and will not restart
Massey Ferguson Tractors
Replies 5 Post by poapony