Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

We have a 32" HDTV ready CRT TV that is around five years old. It works fine and easily fits into our built-in entertainment center cabinet so we're happy. When it dies we'll probably get a 40" LCD and be happy. 40" is the largest that will fit in a cabinet and a major remodel is not in the cards. I've heard that Plasma TVs have a much shorter lifespan than LCD and that would be a major deciding factor in which technology to buy.

Flat Screen TV and HDTV got it or going to get it
Everything and Anything
Replies 12 Post by kwschumm

The standard rear hitch must be a century old, and there are increasing implements for it, so surely it's time for some modernization.

I looked into the Delta. The two pieces add almost a couple hundred pounds at the aft point of the hitch. When you have a small tractor that can barely lift a heavy implement like a 6" wood chipper, you don't want that added weight in that location. So give me compactness and especially lightness and I'll buy one.

3-Point Quick Hitch
Kubota Tractors
Replies 59 Post by auerbach

kwschumm genetic predisposition is definitly important but good genetics can be overcome with poor diet and life style very easily. Also you say your cholesterol is as good as any, good in this case can be a relative term many physicians think a total cholesterol of 200 is good. It really should be < = to 150 to really lower the risk of cardiovascular disease. weight ,cholesterol levels and amount of excercise are also not always good indicators of health remember Jim Fix. Studies have shown at autopsy that the average american male has the beginings of cardiovascular disease by age 21. The only way you can truly know your situation is by having a heart cath done or some advanced imaging which is not offered everywhere. Bypasses alone are temporary at best because you have not stopped the reason for the blockage in the first place. Also you are trying to make a vien work like an artery and they have very different morphology. Not to mention what happens in your brain when they clamp off your aorta an all the sludge in it is pushed up into your brain.

South Beach Diet Results
Everything and Anything
Replies 28 Post by drcjv.

Dennis, it pays ok, but not nearly as well as the golfers themselves get paid. ;)

Depending on what we are doing, and where it is, we get a pretty decent per diem, plus all travel & out of pocket expenses, plus a ranger cart and an escort/driver.

Some courses now want us for almost every tournament they host, especially the pro-am stuff.

We are also starting to do a LOT of site work for TV & movie production. A ruined shot, or delay in filming gets spendy REAL fast.

Best of luck.

GEESE
Garden and Landscape
Replies 11 Post by Murf

Staring Jean Reno, this is a black comedy set in Italy, another film that you significant other will love you for. Also a film not in the main stream, filmed in english.<br>
<i><br>
A beleaguered restauranteur (Reno) promises his terminally-ill wife she'll be interred in the same cemetery as her child, but the boneyard is so close to capacity that he finds himself on a frenzied mission to keep everyone else in their bucolic Italian village alive. Meanwhile, his wife prepares her younger, sexier sister to replace her as the family matriarch. An awkward marriage of black comedy.<br>
</i>

For Roseanna 1997
Everything and Anything
Replies 1 Post by DennisCTB

We are now our parents parent's.<br>
<br>
Good Luck Dennis. My mother in-law has no idea what is happening to her.

Away From Her
Everything and Anything
Replies 7 Post by beagle

Thanks Art.

Kubota L2550 Mid PTO
Kubota Tractors
Replies 4 Post by beagle

It's so slow you can barely see it falling.

Greenville

John Deere 955 Lift Arms Slow after being workd a while
John Deere Tractors
Replies 10 Post by brianlyons

Depending on where you live, eight inches of snow might just be a half days snow fall. Even for farmers with big tractors and equipment they will stack manure around here until they can get out in the fields easier in the spring. That would be good cause for the pto drive for our area.
I'm suprised that the box on a millcreek would go bad in just five years! You must not be putting to much hay into it and leaving it in the weather for it to go bad so quickly.
A year or two ago we hadd a fellow in that was looking for a part to his spreader, a sprocket off the wheel that drove it. The spreader had always been in the family on a three generation horse farm and was older then I am. That's old for a working spreader!

Small Manure Spreaders
Parts and Repair
Replies 19 Post by Art White

Sounds like the clutch pack is gone. I'd do a little more testing on the two circuits with some gauges to see if you do have good flow but in the past that hot cold is normally a give away that it isn't just a valve hanging up.

JOHN DEERE 300B BACKHOE SLUGGISH 1ST GEAR
Parts and Repair
Replies 2 Post by Art White

Well, I'm not fluent - but I do have Germanic ancestry, and I lived in Stuttgart-Vaihingen for several years. As such, I can't discourage pursuit of the tribal name angle. But remember that it's not unusual for tribes to carry names related to where they lived or what they did. Considering the root words KESSEL and RING, the combination could represent something as simple as a what the patriarch did for a living (boilers/pots) or where they lived (the road around Kessel)<br>
<br>
//greg//

Anyone fluent in German Need help on a translation
Just For Fun Off Topic
Replies 4 Post by greg_g

To add to Joel's accurate info, they range from $20, 200w cigar-lighter plug-ins to charge your cell-phone in the car to industrial monsters. My 2000w (that's peak or starting power; on continuous it's 1200w) will run up to about an 8-amp appliance (small chain saw, hedge trimmer, air compressor, leaf blower, whatever); it's the size of a shoebox.

The dealer's shop can mount it and connect it to the battery. Then make rain-cover for it; you don't want water getting in even if it's "off." I made mine from plywood.

Another suggestion is to find a toolbox that will fit somewhere, and get the dealer to mount it.

PTO requirements for newbie
Kubota Tractors
Replies 44 Post by auerbach

There should be a thumbnail of all the pics to the far right of the picture album.

Tractorpoint Photo Gallery
Website Operations Howto
Replies 6 Post by Billy

Not sure but it is a small engine 2 stroke with gas peddle ignition .but I think the engine is made by Jacobsen as well.

how to change a govener
Garden and Landscape
Replies 9 Post by lot0210

My local JD dealer sells these as impulse items right at the counter.

Hydraulic Quick Connect Dust Covers
Parts and Repair
Replies 6 Post by kleinchris

and I just realized I have been spelling hydraulics wrong this etire time...sorry

Kubota b7610 w loader hydraulic question
Loaders Back Hoes
Replies 6 Post by mjs122276

Dennis, I haven't really found any way that is worth while to remove the ring. I haven't had any leak after replacing the attached piece, if it be luck or I just haven't done it enough. Anyway you can get it to move by a chisel or die grinder would work.

Compression Fittings
Home Improvement
Replies 14 Post by Art White

Now that the operating temp is cool is lowers at normal speed. So it go slow after running the unit for a while.
I was doing some heavy box blading in high range.
That's the resy of the story.

John Deere 955 3 Points Arms Slow Going Down
John Deere Tractors
Replies 12 Post by brianlyons

When I need to edit something outside of eclipse I use vim. It's actually pretty good! I haven't looked for a VI plug-in for eclipse, maybe that would fix me up.

Ultraedit Favorite Editor
Everything and Anything
Replies 6 Post by kwschumm

KubotaRep, any idea how much they're gonna be asking for the L2230A QC? I'd really like to get one if it is truly skid steer compatible...doesn't make sense to go with a proprietary quick coupler style.

Thanks,
Mark

Kubota LA463 Loader
Loaders Back Hoes
Replies 8 Post by mobilus