Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

My TZ25 has only 32 hours on her, but today when outside, the RPM's would drop to nothing and lack power bad, then be ok...back and forth. Sounds like a fuel problem? I've been using #2 heating oil..clean, very clean! Any ideas??? (Or am I really screwing up with the fuel?).

TZ25 lacking power fuel
New Holland Tractors
Replies 4 Post by wny770

Kwschumm; thanks for the info on the tilt wheeel. I would say I would do the same. If I eventually get a cab, can i install AC? I know I can install heat.

Nuru

Considering a Jump to a 4310
John Deere Tractors
Replies 36 Post by Nuruadv

If you can see the PS unit from all angles it surely will have a name and part or serial number somewhere on it to help you identify it. Most any farm tractor dealership or hydraulic repair shop will have a way to figure out who made it and parts availability. Bsat of luck. Frank.

b7200 power steering
Kubota Tractors
Replies 4 Post by hardwood

Not sure bout the sending unit, think im gonna pull the sump and take a look.

clatter in the engine
Jinma Farmpro Agracat Nortrac
Replies 8 Post by cdeasy

i believe it is in gear unit. It has four gear. It has also have a creerp built into it. I am replacing it already but again i am still having the same problem.

CASE IH 5120
Case
Replies 4 Post by vannarin

It's not recommended but you can.

Here's how I've done it: Get a 3/8 cable the lenght you need (within reason 20-25'max) put a stove plug on one end and your welder receptical on other.

Make sure your stove is a 50amp breaker and the cables are at least 8ga.

Temp Power for Lincoln MIG Welder
Parts and Repair
Replies 4 Post by harvey

Is anyone familiar with the Massey 2500 Fork lift? Mor specifically the hydraulic brake master & slave cylinders. <br>
<br>
This tractor has disk brakes & the hydraulics are shot. Parts source?

2500 MF Forklift
Massey Ferguson Tractors
Replies 2 Post by millman52

The only thing I can think of to pass oil by, would be the relief or the pump, when I would move forward or backwards the pedal would chatter when under a load, fine if you are just traveling from point A To B with no load, but as soon as I would put a load on the tractor this is when the pedal would chatter. Even when I drove the tractor in 6 inches of snow in 4 low it would start to chatter, never had this problem before. I have no clue I’ll see what it does when it comes back on Monday.

BX relief lifting
Kubota Tractors
Replies 14 Post by botamac

I am looking for a front mounted snowplow for my JD 1070.<br>
Does Deere make a plow that fit this tractor?

Wanted Snowplow for tractor
Snowblowers / Snow Plows
Replies 7 Post by bneese

Thanks very much for the help, I had already found the dipstick and everything looks good so far. Can't wait to put her to work.

Thanks again,
B Snow

Hinomoto 2304
Hinomoto
Replies 5 Post by firesnow4

The biggest problem of electrical operational problems, strating and lights is most often the grounds or wiring on a five plus year old machine with any make that we sell.
Good call again Murf!

Kubota B7100HST 1994 could not start the engine
Kubota Tractors
Replies 9 Post by Art White

I agree, maybe the cuts self contained system would be marginal at best it was my first stab. A rear pto pump would do the trick in a heart beat along with a tank on the 3 pt hitch. My snow blower uses a long drive shaft running under the tractor to the rear pto with a power transfer box that slides into the snow blowers frame and pto. Yeah ,I looked at JD mid pto blower and I will tell everyone again.JD's 59 inch blower does NOT come close to the quality of this unit and it was cheaper to boot !!!!! yes ,the pump/motor would cost and everyone has design ideas, hydraulic disconects are faster and in my opion easier than welding and fabrication. The tank/pump set up like a 3pt backhoe would give someone that wants to keep the fel one the tractor an option. I would have looked into this option rather than dropping my fel to mount the blower. The idea of going into a 4ft high snow drift and sending it 30-40 ft in the other direction is is is AAARRRGGGHHHHH HULK SMASH !!!!You know the price of convenentcy and time are expensive !!! Hind sight is 20/20.

Front end loader snowblower
Snowblowers / Snow Plows
Replies 18 Post by JAZAK5

Randy, best advice I got for the head cold was from an old Finlander, steam!!!

Park your self in a sauna if you can, if not, get a big bowl of really hot water, and an old towel, put your head over the bowl and put the towel over your head to trap the steam. It will break up the congestion fast, but keep the kleenex nearby, when it lets go your nose will run for days!!!

Hey, another reason I like the internet!!! No germs!!!

Best of luck.

Illness Survey
Everything and Anything
Replies 13 Post by Murf

I was really hoping that there was going to be a common problem that already had a fix, but it looks like I have a date with a multimeter.

Does anyone have a wiring diagram for my 4300 that they could email me? I would be interested in the interlock and starter diagram. This would help me tremendously.

Also, are there any other interlocks besides the seat, pedals, and PTO? Are these switches normally open or closed. I guess what I am saying if they are normally closed then I can unplug and jumper out right?

JD 4300 Starting Problem Interlock
John Deere Tractors
Replies 19 Post by Haney1

Frank,
Could not read your whole reply, but check out americanrotary.com I found them to have the best price,carry everything you might need to hook up(at the best prices),and will help you with any questions, I am very happy with mine.
good luck

Opinions on Grizzly brand machines
Home Improvement
Replies 8 Post by Hettric

Ann makes a very good point, but missed one other aspect in her mathematical (financial?) calculations.

If you leave the heater plugged in 24/7, you will be running it (them?) 720 hours a month, times who knows how many months a year, depending on where you live.

Like anything, a heater element has a finite life. Take my word for it, changing a burnt out block heater, definitely falls into the category of PITA. Even if it's only the magnetic or other external heater that burns out, replacing it will cost you more money.

It's easiest if you can leave it all pliugged in, but don't energize the plug, or extension cord, until a few hours before you actually need it.

As Ann so correctly pointed out, 2 heaters would cost you ~$40 a month, so for the cost of a few months of saved electricity you could easily install a switched outlet or put in a timer at least.

Best of luck.

Leaving tractor plugged in
Kubota Tractors
Replies 23 Post by Murf

Thanks I had tried comp. release before but not in conjunction with fuel cutoff.

B7200
Kubota Tractors
Replies 3 Post by takone

gturner; Are you looking for someone with one to sell? or do you want opinions on them? Tell us more, we'll try to help. Enjoy your day. Frank.

I want to buy a John Deere 2305
John Deere Tractors
Replies 3 Post by hardwood

I don't have a manual here. Is there an online source for information on the fuse block. Headlights stopped working!<br>
Thanks in advance!!

Help with fuse block for Gator HPX
Utility Vehicles UTV/ATV
Replies 1 Post by jpw431

www.tractordata.com<br>
More than I ever wanted to know!!<br>
300DTC marketed by LongAgribusiness LLC.. plant located in Faridabad, India. Montana has no relation, except offer to buy out Long/Escort recently but Escort declined.

FarmTrac 300DTC
Other Tractor Brands
Replies 10 Post by firedog