Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I have a long 2360 I was backing up with the bushaul engagaged but I didn't have the leaver on the left pulled down and now it wont start have replaced starter, cables,battery,still turns over real slow ,wont jumpstart it just slides when I try to pull start with with the truck even in high range! HELP!<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>

long tractor
Long
Replies 2 Post by PrettyTony

Im pissed! I think I am getting layed away. Was told to day that I am in the hole (litterally) for 4K. (For the hole that was dug) Im cool with that but then he tells me he wants to use a steel pipe to hang the pump from instead of plastic just incase something falls ontop of the pump. (HMMMM) I ask him how much he says anouther 8 hundred atleast! (Hmmmm) I ask how much water I have now, he says, " oh you have atleast a few gallons a minuit" (Hmmm) A few??? Didnt you pump it to find out? Im burnning up now. He tells me that he would have toi use his truck to drop the steel pipe holding the pump down the well, ya know there are a few soft spots in that hole???
Hmmmm.... Me smells something here? I told him Id get back to him.
I call my buddy up there and ask his opinion since he used to be a driller out west and he saw what was brought up by my well guys. My buddy tells me that they brought nothing but soft crap up till the last 20 feet and then it was marginal for how hard the material might be! SO This tells me that my hole!!!!! Will colapse sooner or later, RIGHT????? Or am I wrong? I should have casing down thru this soft crap right? Me thinks I need to get anouther well guy in there to tell me if I am getting wet and dont know it? What do you all think? Ya think I should drop a pump thru 40 feet of casing and then anouther 100 foot of JUST DRILLED hole (and it is soft crap not rock?) LOL

Yep, I think I feel something wet and warm running down my back and I dont think its the Summer thunderstorm the well driller is telling me that is making me wet!

Well Water Problems
Home Improvement
Replies 37 Post by brokenarrow

Candy bought the Toronto Argonauts in 91 with Gretzky. I am not sure if Gretzky still owns it. (see link)

Many of the motorhomes are over loaded. They use a light chassy and then you pack them full of stuff.

The electrical service truck are about the same as the bins are full of bolts, wire and heavy materials.

Truck bed limits
Pickup Trucks and Trailers
Replies 29 Post by Peters

The only disadvantage that I know of is that I really have to spray in calmer conditions. The advantage is that there is no boom to mess with. That may be an advantage for some in some cases though. When first considering the sprayer last year, I did not know about "boomless;" but I like it now.

Sprayer for ATV
Utility Vehicles UTV/ATV
Replies 18 Post by wr5evk8jj

THANKS I KNOW, I WAS JUST WONDERING IF THIS SOUNDS LIKE A GOOD DEAL, ? UNLESS ANYONE KNOWS OF A TRACTOR OUT THERE,
THANKS AGAIN

new holland ford 1520
New Holland Tractors
Replies 12 Post by nwcycle

I am looking for a complete power steering unit for an E324 4 wheel drive tractor. The number on the casting is 75430 10265A made by Toyoda.

PARTS
Hinomoto
Replies 4 Post by Herbert

You gotta eat a pound of salt together before you know who the other person is. When a man proves himself in hardship, you know he's good enough to be a partner in business. Otherwise you have problems like you folk describe.

Business Plans
Just For Fun Off Topic
Replies 14 Post by DenisS

I have had Alaskan Malamutes for many many years and being a direct shot off of the Wolf, they roll. Find a dead bird, they roll, find a piece of foriegn Sh-- they roll. My current bithc will roll on her ball or on a dead Lady Bug or even a Fly. As Peters said, I have no doubt it is to mask their own scent. Or baffle the nostrils off of anyone following them.
Some of you younger ones need to grab a copy of Cheech and Chongs old LPs and listen to FiFi and the Gum in the butt.

The Lab Manure Roll
Everything and Anything
Replies 40 Post by wingwiper

Contact your NH dealer. They now are making a shim kit designed to correct this problem. There are two shims in the kit. They are inserted behind the subframe posts for the FEL. Depending on the lean, the shims are added to the top bolt holes on the right side, and the bottom bolt holes on the left side. This will adjust the right lean problem. Obviously, reversing the shim orientation is necessary if the loader leans to the left.

tz25da has a right side lean
New Holland Tractors
Replies 16 Post by liteblue

It depends on you! I'd recommend the BX24 for the amount of acreage that you have but you don't have the weight or size to do the same work in the same time as the 3030. The BX would be a lower price and if you do like to work with your equipment it would still get done, you would find the lower price would allow you to have all the attachments that you mentioned.

Is B3030 right for me
Kubota Tractors
Replies 3 Post by Art White

The manual didn't say anything about the 8hrs. But the dealer did. Thanks.

Mower Greasing
Kubota Tractors
Replies 3 Post by pondrosa

thanks..sandflat is the type soil on my farm..very sandy.
yes i agree we have lost our oil can..thanks again..!!

CUB 7274 3-POINT CONTROL ARM LEVER
Cub Cadet
Replies 11 Post by SANDFLATRANCH

I've found that dropping by a dealership and talking with a service manager who lets me talk to an old timer who gushes with knowledge. Usually he's got manuals and diagrams tucked away for occasions such as this. Sometimes it'll turn into a treasure hunt finding new old stock thay couldn't give away bit you have been looking for for some time.

1977 Case W14 wheel loader wiring diagram
Loaders Back Hoes
Replies 2 Post by earthwrks

Tractor Supply Co has 0% interest for six months on all purchases over $300. <br>
<br>
Just purchased a 5ft KingKutter II Tiller and 5ft KingKutter Box Blade. They added Gear Lube and 1/2 dozen Lynch Pins for good measure.

TSC Father s Day Sale
Kubota Tractors
Replies 1 Post by JBarron

They are very common to blow. Normally with in 150 hrs. to 400 hrs.

TC-25D hydraulics
New Holland Tractors
Replies 6 Post by oneace

There is one way common sense people can help here, serve jury duty. That believe it or not is still legal. Not sure how long before they will require the jury pool to be legal residents.

what s with the gibberish posts from russia
Website Operations Howto
Replies 23 Post by kthompson

To me they are hard or strong clutches to use. They seem to be a good, dependable simple tractor. This is their price line if I am saying that correctly.

One thing the MF will do, they normally have a high road gear compared to any other brand I have used.

Hope you enjoy it.

MF 253 info ASAP
Massey Ferguson Tractors
Replies 8 Post by kthompson

Rick,
When I see the loader split up between loader/bucker/quick coupler/joystick - I see the dealer is trying to have me. Those all things should come as a unit.

L3130 200hrs 31hp $22,400
Case DX33 40hrs 33hp $19,000

If I were you I'd go to that Kubota dealer and tell him that you want the L3130, but the smarter choice for you is the Case and you're getting the Case for $3400 less than the Kubota. Tell him that you'll buy his tractor if he's willing to work off $500 off his price. If not, Case is a good tractor.

L3130 Last call for right call
Kubota Tractors
Replies 14 Post by DenisS

tex-hound,

I have no idea if they have the blades you need but Agri Supply does a good job for many brands. Prices normally are very good. They sell foreign made in a lot of items but also USA made in others.

The do stand behind what they sell very well.

GD, GB

Rhino SE5 cutter
Mowers Field and Finish
Replies 2 Post by kthompson

zcases,

Kubota shows having that tractor but that is about all the info their web site gives for it. Good thing earthwrks knows the loops.

GD, GB

FZ2400 D1105 oil capacity
Kubota Tractors
Replies 8 Post by kthompson