Go Bottom Go Bottom

long tractor

View my Photos
PrettyTony
Join Date: May 2006
Posts: 1 Memphis, TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-06-13          130827

I have a long 2360 I was backing up with the bushaul engagaged but I didn't have the leaver on the left pulled down and now it wont start have replaced starter, cables,battery,still turns over real slow ,wont jumpstart it just slides when I try to pull start with with the truck even in high range! HELP!









Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



long tractor

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-06-14          130832

PrettyTony,

I hope I am wrong, but my guess is you jammed the pto shaft by the bushog pushing against the pto shaft past the point where the pto shaft could collapse any more. If so you probably bent one or more of the shifter forks in the transmission not allowing you to fully disengage.

Have you tried working your levers to see if you can feel them shifting? Transmission and pto.

I did the same type with a flail mower driving down a bank. I had disconnected the third arm as suggested to give more movement to the mower which was BAD advice by a well meaning friend.



....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login