Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I don't think any tire will do great in 2 feet of snow. I have chains but clearance is always an issue to be taken seriously. You can see my picture 12. I like front for their ease of install, help steering and they carry the load with front end loaders.

B7800 Tire Chains
Snowblowers / Snow Plows
Replies 8 Post by denwood

If you find something interesting, posting here can always give you a good idea if the price is in the right ballpark.

Kubota B6200E Loader
Kubota Tractors
Replies 8 Post by denwood

I have a Grand L3430 with r-4 tires would a 6ft k k tiller work the tractor to hard or what size tiller would be good for my tractor my rear wheels are at about65 inches so a 5 foot tiller would not cover my tracks thanks to anyone that could help me

what size tiller for L3430
Kubota Tractors
Replies 8 Post by jd1955

Started my B7800 after a month in the garage and drove it out to the driveway. Ran for 5 minutes then turned it off to answer the phone in the house. Came back and now it won't turn over. Glow plug indicator lights up, but no click or anything when I turn it to start. Side interlocks on PTOs tested OK and no fuses blown. Any ideas? Could it be the relay, and where is it located?

B7800 stopped starting
Kubota Tractors
Replies 10 Post by lamagaba

I have a Woods SB60 snowblower,I'm looking to change the 'stick and pin' adjustment for the chute deflector. Its a pain having to get off the tractor and change it and then do it again etc. I know some go hydralic, I don't have rear hydralics as of yet-a long ways off $$$. Has anyone experiment with cable. Looking for any Ideas Thanks<br>

Chute Deflector
Snowblowers / Snow Plows
Replies 5 Post by Woodie

It's been several years since I've had a Farmall painted, but the man who did the painting allways insisted on having the paint and the primer from CaseIH. For some reason he did'nt like auto store paint. Some of the IH impliments that were used on the old Farmall Letter series (C's, H's, M's etc.) had part of the componets painted blue. The last time I bought paint from CaseIH the blue was no longer available, but I was told Big A, or NAPA had the correct formula. Frank.

restore farmall cub
Tractor Projects
Replies 5 Post by hardwood

I like brokenarrows idea, where there is a will there is a way even if it is a sunday or nighttime assignment. I ran water to my garage but it is not heated. Where I live, many people use frost free hydrants, 36 inch is all we need. I don't know if they have them past 5 feet depth, but then it certainly wouldn't be connected to the garage if that is what you need for code. Then you could plumb the garage and run a garden hose jumper to a faucet on the outside of the garage to fire up the inside. Warm weather only, but it beats waiting for the next house and is cheap. You could use it in winter just not leave it hooked up long.

Water to the garage
Home Improvement
Replies 17 Post by denwood

They are all different. Most are coming with some fluids depending on the degree of factory assembly and it's location. Years ago they would come totally dry do to the amount of assembly. Today many of the tractors are at least partially assmebled and run and tested at the factory.

Transmisson problem
Kubota Tractors
Replies 28 Post by Art White

Hettric, Used to have a 755, and changed most of the grease fittings on it so that I could grease it easier. Obviously it is cheaper for the factory to install short straight nipples instead of the 90 or 45 angled fittings. I just had an Alemite assortment and changed them. I believe they were a standard 1/28 taper thread and worked fine for me.
Mike.

Grease fittings
John Deere Tractors
Replies 6 Post by Mikef54

quote
QUOTE:
---------------------------
Rap music is not a generational issue. Rap music is shit from The Pit.
--------------------------

AMEN! AMEN!

QUOTE:
--------------------------
Why in the world would any SANE PERSON want to listen to, or encourage lyrics that glorify death, rape, prostitution, murder of cops and presidents, drugs, gangs, mindless thuggery, oral/anal sex, mayhem, butchery and homicide?
--------------------------

I think the key words here are "Sane Person"

I have been to several low budget weddings. And to tell the truth, they are generally (there is 'one' wedding that was pathetic) far more enjoyable than the big budget ones. I''m just more 'comfortable' at these informal ones.

They generally get everyone involved (freinds, family, church, etc.) in helping out, which right off the bat takes a lot of pressure of whatever poor person is usually responsible for everything.

One of the most memorable I ever went to, was a small wedding (maybe 70 people) in a park under a huge oak tree. They brought one of those trellis archways like you buy at home depot for a few bucks, and some stakes driven into the ground with some frilly fabric draped between them as a barrior. Their were no chairs so everyone stood. The pastor gave a reasonably short but great sermon/wedding ceremony. Music at the event was a guy from their church on guitar and a girl standing next to him singing.

Reception followed a few miles away at someones home, and it was a pot luck affair. Persoanlly I love pot lucks. Food was much better than those tiny boiled chicken things you usually get at fancy weddings.

There was some time between the wedding to allow everyone to change into casual clothes if desired (I desired).

The cake was home made (but still very nice). Music at the reception was the same couple who performed at the wedding. They were paid with donations at the reception desk (a dressed up coffee can next to the guest register).

I think their only expenses were the tux rentals, the gown (modest but nice), the trellis, the pastor, some frilly stuff, flowers, and materials to make dresses for the bridesmaids (sewing was doen by a volunteer).

Oh, they also rented a horse and carriage to take them from the park to the reception (that was a really nice touch)

I bet this wedding was only about a thousand dollars, and everyone had a great time. It was very nice.

The bride and grooms parents came together and put up $35k to be used as a down payment onn a house, and the couple saved up theiir own money in advance for a modest honeymoon.

It has been about nine years now, and they have two kids, a nice house (their 'only' debt) in a great neighborhood, and are very happilly married.

Unless you are rich, I'm of the mind that spending all that money on a wedding which only lasts a few hours is plain foolish, especially when the money can be used towards the couples future.

Weddings
Everything and Anything
Replies 38 Post by DeTwang

I know what you mean by too many engines, I am in the teens without counting anything you can ride. That is why I now buy only hondas. They are as close as you can get to no maintenance. My honda tiller is over 15 years old and I have only changed the oil a few times. I always use 93 octane gas, and never winterize anything.

JD4100 Hydraulics
John Deere Tractors
Replies 24 Post by denwood

Any REAL shop manuals are pricey, not just from John Deere. I have bought several over the years:

- JD 4110 $140
- 1996 Mustang $100+
- 2000 Dodge Dakota $180

If you are going to invest thousands in something, plan to keep them for many years, and plan to do most/all of the service yourself they are worth their weight in gold. (well maybe silver..they are pretty heavy! lol)

Want a John Deere service manual
John Deere Tractors
Replies 16 Post by DennoAce

The 46" snowthrower works like a demon, but it is noisy. Mine sounds like the bearings are square instead of round, did so when it was new 12 years ago, does so today.

Cheers

JDFANATIC

2210 Snowblower
John Deere Tractors
Replies 21 Post by JDFANATIC

Thanks Harvey. I have one on the Allis leaking as well, thought the process would be about what you said. I will probably wait until warmer weather now, loader not in use as much.

Curl Cylinder leaking
Kubota Tractors
Replies 3 Post by cutter

Thank you for your Reply. <br>
What I would like to know is how to unfreeze it.<br>
Also remember that the pedal's hole was 2/3 broken prior to my <br>
breaking it when I tried to free it up.<br>
Plus I need to buy a new pedal and I need to know how to put that pedal on the shaft. <br>
There is not enough room to slide it on.<br>
Can the shaft be pushed back or beaten back with a copper/brass bar far enough to slide the pedal on?<br>
Or does the rear end need to be taken apart?<br>
If so than is this a job for JD service?<br>

Fixing JD Differential lock pedal
John Deere Tractors
Replies 16 Post by pszikszai

Like oneace said,let the rpms determine your speed. I run mine at 2500. I have had the snow rolling right over the top of the blower,24+". Without any problem. "that ain't no lawnmower" The little diesel is impressive!
Start on the upwind side when possible.

SnowBlower Capacity Question
Snowblowers / Snow Plows
Replies 6 Post by grinder

Just to follow up in case someone else is interested. I finally decided the only way to be sure about the correct thread was to buy one of the banjo bolts from JD and measure it. I could have just taken one out of my tractor, but then I'd be into the job and didn't want to dump the trans/hydr fluid and all until I had the parts to plumb up the new TNT installation.

It turns out, as I was guessing, that the banjo bolts are the same thread as an SAE8, 3/4" x 16 TPI. An appropriate replacement is an SAE8 straight thread O-ring fitting. I verified this with a high quality thread gauge and by threading an SAE8 threaded cap onto it. I thought there was some chance that this could be a BSPP thread, but the thread gauge confirmed that it is an Amarican thread, the BSPP threads have a slightly different tooth angle that is distinctly visible with a thread gauge.

The other odd thing in the hydraulic plumbing in the 790 is the steel tubing pressure lines from the pump to the SCV valve and from the SCV to the FEL couplings. The tubing measures .485" OD. Normally hydraulic tubing is measured in even OD sizes, 1/4" 5/16", 3/8", 7/16", or 1/2". This makes it 0.015" shy of 1/2" even with a coat. It is also not quite a metric size, about 0.012" smaller than 12mm. Seems odd, can't understand what this size is? It turns out that the return to tank line that I want to tee into will be pretty awkward to replace with other fittings. I was kind of planning to just cut this line open and put a compression tee in the middle of it for the new tank return line, but I don't think a 1/2" compression fitting will squeeze down enough to bite into tubing this small.

Other options:
1) Make some custom brazed TEEs with the .485" braze slip fittings on the ends and maybe a standard SAE8 port in the middle?
2) Replace the line I need to tee into with a new 1/2" line with SAE8 all around. This is fine in theory, but both ends of this line are in a pretty awkward locations for spinning on SAE8 ells. One virtue of the banjo fitting is that it takes almost no clearance to spin the banjo bolt in with the banjo tubing oriented any direction needed. All you need is enough clearance for a box wrench. With an ell fitting you have to have about 1" clearance around the port for a full 360 degrees to thread the ell into the port.
3) I suppose I might be able to cut the existing line open, put 37 degree flares on the .485" tubing ends, and use a JIC tee for 1/2" tubing?

Something to comtemplate some more.

Banjo Hydraulic fittings question
Operating and Attachments
Replies 2 Post by tomrscott

Art,

Thanks. That was it!

J

Cold starting Kubota L3430
Kubota Tractors
Replies 4 Post by jsansky

need some help, I have an older tomahawk chipper that attaches to the old troy bilt 8 horse tiller.<br>
the chipper works fine but is in bad need of a paint job.<br>
<br>
does anyone know where to get the corrct paint color?

tomahawk chipper shredder
Operating and Attachments
Replies 1 Post by tractors-r-me

Your supply is a variable in this system with a single pump. On 2600 tractors from driving them I'd say they maybe have about 2 gallon potential draw. There is much that goes into this as you also have the type of power steering which also gets into the type and size of cylinders. Interesting thought for you boys that the 80's Ford 7000 series an 85 horsepower farm tractor only had a 7 gallon per minute pump for the hitch and remotes. There are different results from the different makes tractors in there steering. Some can have a full bucket and at a idle or near they can rotate the front from end to end.

who makes the a good back hoe
Loaders Back Hoes
Replies 24 Post by Art White