Tractorpoint Login

print < Tractorpoint Login

Search for = Harold

Topic

Simon,
The steering box bearing is NSK #15BSW02 and is available through KAMAN Bearing Co. NSK also make the nut & shaft.
You are right about the bicycle bearing. If your outer bearing race and the shaft(inner race)are reasonably smooth, the bicycle cage and rollers will work. Use a bearing from a bike shop that has 8-(0.219"diameter) balls
with an inside diameter of 5/8 inch. Take the outer race and shaft with you to the bike shop. i do this while waiting for Kaman delivery. Bike shop $2.00 US!!!!!

Kubota steering box bearings
Kubota Tractors
Replies 8 Post by hejharold

I was looking for info, pricing , etc. on model 2350dt, maybe a '97 model. why can I not find this model

info on 2350dt kubota can t find any
Kubota Tractors
Replies 3 Post by harold anderson

WAIT TILL YOU NEED A PART KUBOTA IS SKY HIGH AND ARE HAVING PARTS SHORTAGES

Need a HST filter for L4310 online
Kubota Tractors
Replies 20 Post by HAROLD10

Thanks all for your suggestions! I had previously discounted Roundup due to cost and potential lasting effects.

Anybody have suggestions for where to get it in bulk/cheap?

Thanks!

Implement for weed control removal
Operating and Attachments
Replies 18 Post by Harold_D

Thanks to all for your input.

After further investigation (and education of my agent), they do cover it under my homeowners as long as it's under 40hp and is used to service my property.

Insurance for tractor
Kubota Tractors
Replies 10 Post by Harold D

Hi,

I just purchased a 4010 compact at auction and would like to get a FEL for it. Does anyone know of any aftermarket loaders that will fit it and pricing. I'm looking for one that with quick detach.

Thanks in advance.

FEL prices for 4010 compact
John Deere Tractors
Replies 3 Post by Haroldx007

Great idea on $/hr for used - I'll start looking at them that way!

What I call a gannon (could be using term incorrectly - I'm new at this) others may call a box scraper. It's a 3pt attachment that has reversible "teeth" that can be used to rip the ground in front of the box scraper.

Thanks for the thoughts!
--Harold

purchasing used rental 4200 vs new 4210
John Deere Tractors
Replies 11 Post by Harold D

I wonder if anybody else out there has done a stupid thing like set the parking brake lever, and continued to use the tractor for about 15 - 20 min.,with the gear range in low, and 4-wheel drive. I clearly forgot about the parking brake being on. I was just wandering if this messed up anything major or wore the wet disk type brakes. After noticing I left the brakes on I released it and the tractor seemed to be fine.

B-2710 Parking brake lever
Kubota Tractors
Replies 3 Post by Harold J.

I decieded to go with Kubota and I am glade that I did because I have needed parts and I was able to get them the same day or within two days of ordering. I do know if that we have been the case with the Jimna tractors. If there were a local dealer where I could see the tractor and know that they had a inventory of parts, I would have brought the Jimna tractor because of the cost and that it seems to be a pretty good tractor for your basic needs. But I can not live without my Hydrastat and Jimna is not there yet on that technology yet but if they do, I will go back and visit it again. Thanks for asking. My recommendation for anyone on these tractors is if you have a local dealer go for it otherwise stay away from.

Jinma Tractors
Jinma Farmpro Agracat Nortrac
Replies 10 Post by Harold

I have B2400 4WD that will not disengage the 540 PTO. The shifter is in the disengage position. When I try to pull it to engage it fells like it hitting something solid and it will not move. I have looked at it and removed the retaining pins that hold the linkage to the shaft that goes into the transmission, thinking that it was out of position and tried to move it by hand but it will not move. Does anyone what has happen. When this occurred I was brushhogging my pasture and when I went to disengage the shifter by moving it to the disengage position and it move to the disengagment position but the PTO was still turning my brushhog. Any help or ideals will be helpfull especially the cost for repairs if I have to take it in. For more spec's on my tractor it is 4WD, hydro trans and it has the mid pto.

540 PTO Won 039t disengage
Parts and Repair
Replies 2 Post by Harold

I just priced a 4200 HST with a 420 loader R4's $1806 including tax.

Price Check on JD4200 Please ASAP
John Deere Tractors
Replies 13 Post by Harold

I just wanted to add to this thread that I have a new JD1070 with 110
hours on it. Since about 10 hours, actually since I got it, I have
found it erratic in shifting ranges. Sometimes it just doesn't want to
"pop in" to any selected range. Not sure what this means. So far, it
will pop in sooner or later but I've never been able to determine extacly what
changed so that the resistance would go away.

1070 hard shifting gears
Parts and Repair
Replies 20 Post by Harold Koenig

I have JD 655 with a 50" finish mower with 250 hours on it that I will sell to anyone interested. I will take 5000.00 for it. I believe it is 1988 model

JD 650S
John Deere Tractors
Replies 12 Post by Harold

Thanks, Rick. I think I have a pretty good line on price. Now the hard part, choosing the rig. Kind of leaning towards Cub. The tractor just felt good on me. Besides, I've been waiting three weeks for the NH dealer to give me some info I needed, he hasn't even returned my calls.

Price for NH w SS HST Loader deck FWD
New Holland Tractors
Replies 14 Post by Harold

I recently acquired a Ford 1100 4wd with front weights. Will this tractor pull a five ft finish mower without overworking it? I get conflicting stories from dealers. Obviously I would rather pull a 5 ft but if I have to mow in a lower gear and have to worry about the grass getting too tall I would be better off with a 4 ft????? Thanks ahead of time. Harold

Ford 1100 4Wd
Mowers Field and Finish
Replies 2 Post by Harold

Model 40U is a wide frontend Utility model which is stuck in 3rd gear, believe shifter fork may be broke, father-in-law says need to replace

JD Model 40U Transmission
John Deere Tractors
Replies 2 Post by Harold

Looking for battery cases to hold 6-volt golf car batteries. The battery cases the RV stores carry are too short.

Battery Cases
Other Tractor Brands
Replies 1 Post by Harold

I heard a while back that Ford bought the small diesel truck division of Cummins. Can anyone confirm this. If this is true then Ford will be selling Cummins engines to put in Dodge trucks or maybe they won't sell to Dodge. ???

Ford buys Cummins
Other Tractor Brands
Replies 5 Post by Harold

<br>I own a JD4100. NOWHERE in the warranty does it say that the warranty is voided if a backhoe is installed on the tractor. This is pure gossip that began as a conjecture and spread until now everyone thinks it is a fact. My advice. Get a copy of the JD4100 warranty and read it for yourself.

4100 Backhoe
Other Tractor Brands
Replies 8 Post by Harold

<br>Poppycock!

Money for a Compact Tractor
Other Tractor Brands
Replies 4 Post by Harold