Tractorpoint Login

print < Tractorpoint Login

Search for = Carter

Topic

when i purchased my belarus the front end loader wasnt connected or anything and i have new hoses to replace the hydraulic lines and connections but i cant find a diagram showing me where the hoses all go. im not familiar with the front end hydraulic systems since this is my first tractor with a front end loader. if anyone could send me a sketch or diagram i would appreciate it!<br>
Thanks<br>
Tommy

Belarus 611 Hydraulic system
Belarus
Replies 1 Post by tommycarter

My 955 compact tractor will not lower the belly mower or the three point hitch with the lever. It does raise fine. if left over night it will leak down. the adjust knob under seat is all the way out. It has done this before and all I had to do was turn the knob. does anyone know how this knob works? is it a valve or is it a cable going to a valve? Any info on what I need to do to fix this will be appreciated.

jd 955 hydraulic will not lower
John Deere Tractors
Replies 2 Post by lcarter

I had the same problem with my Bh 1st time I had it off. There is some adjustment in what the owners manual calls the movable latch plates (where the rockshaft pins lift the hoe up). I had to take a jack and lift the hoe up enough to get the pins in and then adjust the plates, haven't had a problem since then. My rockshaft arms don't seem to want to go down by themselves if there isn't anything attached to them, must not have enough weight. Hope this helps.

4310 with 48 hoe cannot get it to attach
John Deere Tractors
Replies 11 Post by Carter

Had a chance to look at the JD service manual on the 48 hoes and they mention that the steps have to be mounted away from the tires (towards the back of the tractor), maybe it's something as simple as swapping the stabilizers side to side?

JD 4000 Ten Series-thread for all comments on new line
John Deere Tractors
Replies 49 Post by Carter

Ken
Sorry to hear about your experience with the dealer. The dealer i've been working with has bent over backwards to answer questions, help with problems whatever. Asked them about JD's out of warranty policy and they indicated that for something like what you are experiencing they would more than likely fix it and try to find out why it failed to begin with. You might want to try and talk to another dealer if you can and see what response you get.
These tractors cost too much to buy and repair to let the manufacturer get away with anything. BTW my 4300 has been relatively troublefree and the fewthings that did get out of whack, the dealer fixed right now.
Good luck and keep us posted.

47 BH Leaking down
Loaders Back Hoes
Replies 9 Post by Carter

just bought a 66 modle. came with extra deck. have not checked it out yet but my be better than yours. live in orlando,fl. let me know if your interested.
crbman@hotmail.com

Mower deck for 1962 Cub
Cub Cadet
Replies 5 Post by Frank Carter

What year is it? Just bought tractor and want info on where to find parts/manuals ect. Live in Orlando Fl. Where and what kind of attachments are avaiable? Any help.Thx.

crbman@hotmail.com

I H Cub Cadet Model 102 161461
Cub Cadet
Replies 2 Post by Frank Carter

I had the same problem on my 4300 and the dealer replaced 2 of the panels (left side and grill). When the tab on the grill panel broke for the second time I fixed it myself and it hasn't broken since. I bought a fiberglass repair kit that has the resin and cloth and used 1 layer to glue and reinforce the tab then put a thin piece of sheetmetal and another layer of glass over that. You can't see it and it seems to have held up well even in cold weather. Hope this helps.

1999 John Deere 4300-cracking plastic
John Deere Tractors
Replies 9 Post by carter

I have a 47 hoe on a 4300. It cost about $5,200 which included power beyond kit and installation. It mounts using brackets which are bolted directly to tractor. After removing 3 pt you use rockshaft arms to lift it into place. As the previous post mentioned takes about 10 minutes. Most aftermarket hoes utilize 3pt arms and linkages and sometimes separate hydraulics to operate. Mounted on 3pt they don't seem to be as stable as JD hoe. It's been a very troublefree unit and I feel that it has basically paid for itself in the 2 years I've had it.

Model 47 Backhoe
John Deere Tractors
Replies 10 Post by carter

Thanks Paul that is a nice site

cadloader
Loaders Back Hoes
Replies 3 Post by Howard Carter

Does anyone know the best fel for a 1140. I just recently aquired a 27hp awd w/116 hrs

1140 tractor
Case
Replies 2 Post by Howard Carter

Need assistance on pricing and dependability for the above two machines. There is an auction here in Abilene and I need a tractor and/or backhoe for general use around a 40 acre farm/ranch where I will be putting in roads, digging holes to plant trees, remove scrub oak, etc. The auction is Saturday. The equipment has been used by a general rental center that has gone out of business. The tractor has 1256 hours and the backhoe has 767 hours. Please let me know anything you can share with me.

Pricing on Kubota tractor backhoe
Kubota Tractors
Replies 1 Post by Vicki Carter Johnson

<br>I have A Yanmar 240 I need A main bearing,seal and gasket<br>if there is one and A thrust bearing. Is there A JD part<br>number that would be the same?<br>Woody Carter<br>683 R.V.Lindley Rd.<br>Moselle, Ms. 394549

YANMAR VS JD
Yanmar Tractors
Replies 18 Post by William D. Carter