Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Hi, Thanks for the replies. Not to sound ignorant or anything but I am aware of the process to clear the service alert message that usually pops up. I do understand that we need to start somewhere and sometimes it could be something that simple. I have cleared it in the past when doing the recommended maintenance. It is simply by pressing and holding the :display mode" and "travel speed" button down for approximately 2-3 seconds with the tractor ignition on and not running. Unfortunately the buttons do not seem to do anything any longer, or at least nothing that I have observed. It was only displaying this intermittently but now seems to be on all of the time.

Kubota L4330 GST won t move
Parts and Repair
Replies 6 Post by swogan

I have a 2004 Kubota 4330 with the GST transmission. On occasion it will move but most of the time when I turn the key on to allow the glow plugs to turn on, the dash indicates "service inspect ABCDEFGH". The glow plugs do not come on but the tractor will start. Once started, the tractor will not go into any gear and move. On occasion, cycling the key will clear the service inspect message and the tractor will function as it should. The hydraulics seem to work as they should (loader, 3 point hitch, power steering). The tractor will move when the service inspect message is on and if the transmission ECU is disconnected and the emergency jumper under the seat is connected. I have replaced the battery and changed the hydraulic oil and filters. Still no change. Does anyone have any ideas of what may be causing this issue?? It is intermittent but is more frequent as of lately.<br>

Kubota L4330 GST won t move and Service Inspect ABCDEFGH indication
Kubota Tractors
Replies 2 Post by swogan