Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Thanks guys;
I talked to my dealer yesterday and was told that the pin inside the silinoid that pushes a ball bearing to let fluid by was bent. If all the ball bearing does is let fluid by then how would it bend. The pin is in a track/slot? and is powered by an electromagnet to push the bearing? So how does the pin bend?

DK35 4wd problem 2007
Kioti Tractors
Replies 18 Post by gandalf

My DK35 (2007) will not go into four wheel drive. I have checked the fuse and power at the box. The dash light comes on so there is power at the switch. Where is the silinoid for the 4x4? There seems to be no mechanical reason. It worked fine one minit and then would not go into gear

4x4 problems
Kioti Tractors
Replies 1 Post by gandalf

Hi there;<br>
I have a DK35SE that is two years old with 238 hours on it. The hydrolic oils have been changed three times and the engine oil five times. When the weather turns cold here in NB, the steering freezes solid. You cannot turn the steering wheel at all. After the tractor warms for twenty minutes all is good. My dealer says water in the oil. I say fooee to that. The oil has been changed and looks presteen. Regular changes should take care of any condensation. The tractor is in an unheated garage, no heat at all. Has anyone else had this problem? If so how did you fix it? I like this little tractor and don't want to trade it yet. But will if I can't fix the problem.

freezing steering on DK35SE
Kioti Tractors
Replies 4 Post by gandalf