Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Hello,<br>
I am the proud owner of a BX1500, & it has done everything I have ask it to do.<br>
<br>
My one dislike is the single control for the lawn deck & the 3 point hitch.<br>
Lowering the mower also lowers the 3 point ( my trailer hitch, or my utility platform.<br>
Is there any way to add another valve to isolate the two?<br>
Thanks<br>
Ron

Bx1500 3 Point and lawn deck control
Kubota Tractors
Replies 12 Post by Ron

I have a YM F18 with a front end loader. Problem is the small front tires 4.0x12. If the ground is ever so soft they sink into the ground. Is there either a wider tire and/or a larger diameter tire for this tractor? Does anyone know if there is a car rim that will fit this hub or a hub that will fit the shaft? Does anyone have a better solution?

Front tires on a F18
Yanmar Tractors
Replies 1 Post by Ron

Hi I just got my b-7200 It seems real cold bloded. It takes 6-8 trys using the glow plug for 60-70 sec each try to get it started The glow plugs and battery are new. <br>
The temp here is in the high 40 but it takes the same process when it is in the 60 70s. After it starts it runs great. I checked the glow plugs and they are 10.5 volt. They have equal restiance . The power supply to them is reading 10 volts. The restance indacater is turning red so everything is working. Is this normal?<br>
PS Where can I get the right side hood/engine cover sheetmetal. <br>
Thanks ron

cold hearted b7200
Kubota Tractors
Replies 3 Post by ron

Check the starter solenoid. Put a test light on the small post. One side should be hot. Do the key and see it the other side lights the light. If so check the large post one should be hot with the key on. When you go to start with the key it should light the other large post and start. I ll bet it is stuck. It just happened when you shut it off and has nothing to do with the loader

bx23 electrical problem
Kubota Tractors
Replies 13 Post by ron

Thank you for the responce. I made a mistake it has a bush hog loader.
Now for a good story.
I talked to the salesman and he told me that it was out of time and wouldn't run. So I went around to the back lot where it was. That is the side the shop guys are. I talked to them again and one said "lets go talk to **** he worked on it." So we did and he told me the little tractor was his winter project. He said he worked on it a hour here and there. He told me the pump was out of time when it came in as a trade. He told me he put a new injector pump on it, a new fuel pump, new injecters and new glow plugs in it. He flushed the rediator and changed all the fluids. He also put a new front seal in the engine. He told me the little tractor was cold blooded and hard to start but ran fine.
I went back to the salesman and again ask him the price.He said $2000 but the injector pump was 180 off. I told him they said it ran ok in the back. He again told me it had problems. I gave him a check for $2000+tax. Today I put a new battery in it at their lot. I heated it for about a minute pulled the compression release and let it wind up, pushed the release in and it sputtered and fired right up. I went to a dirt pile they have at the dealer and played with the tractor and loader for a couple of hours. Tomorrow I go pick it up. I think it was a very lucky day!

b 7200
Kubota Tractors
Replies 6 Post by Ron

Looking for a loader for a Yanmar 1300D 4WD, used or new.Any recomendations? Anyone have one?

Loader foraYanmar1300D 4WD
Yanmar Tractors
Replies 2 Post by Ron

Your mothers Christmas gift!<br>
<br>
I have been looking that perfect gift and finally found that gift for <br>
your mother. She did help with several hints though. We went to look <br>
at tractors a few weeks ago and while there we also looked at <br>
front-end loaders for tractors. I knew from past Christmas' that the <br>
shopping trips include gift hints so I paid close attention to the <br>
items she looks at when shopping. The first item she picked up was a <br>
hat but she quickly return it to the shelves. I tried not to notice <br>
while I was peaking around the shelves and walls to watch. She then <br>
check out the shirts for a longer time period than the hats. I then <br>
started to analyze my observations, while see looked at hats she <br>
seldom wears a hat but she almost always wears some kind of top. With <br>
my first analysis complete, I was thinking a shirt maybe pink or red <br>
as I like red and as she is a girl. I finished the purchasing of the <br>
parts for my tractor and then we went outside to look at the new <br>
tractors and front end loaders. She did not spend a lot of time <br>
looking at the new tractors but did spend most of her time with the <br>
front end loaders. She looked at the price on the tag, viewed the <br>
connections, remarked about the nice green paint and asked if the <br>
loader would install on our tractor. On the ride home she asked <br>
several times what I thought about the front end loader. While she <br>
may like a shirt I feel that a special gift would be a new front end <br>
loader for our tractor. While the front end loader is a lot to ask <br>
for, she has been very good this year. I did not want to make a snap <br>
judgment so I have been looking for other hints at the grocery store, <br>
drug store and gas station. I have picked up on some hints but none as <br>
strong as the front end loader and shirt. I ordered the front end <br>
loader as I did not want to be without that special gift (remember the <br>
cabbage patch dolls) at Christmas but I am still looking for feedback. <br>
While the front end loader your mother has hinted for several times is <br>
a very expressive, I may be able to also get a bargain shirt also what <br>
do you think? Do think a red velvet or pink velvet shirt would go wtih <br>
the most items. Please let me know as soon as possible before all the <br>
nice priced shirts are gone, Dad<br>
<br>
PS due to the expense of the gift your mother wants we may have to <br>
reduce a few other expensive gift!!!! Elizabeth can you suggest <br>
something under $ 10 for Carisa and Mike? Carisa can you suggest something under $ 10 for<br>
Elizabeth? <br>

Your mothers Christmas gift
John Deere Tractors
Replies 3 Post by Ron

The front wheels on my B1700 freeze up and won't turn when the temp outside drops. What to look for?<br>
<br>
Ron

B1700 front wheels freeze
Kubota Tractors
Replies 4 Post by Ron

I'm looking at a CC 7205 for mowing, tilling on 5 acres. What is the towing capacity of this tractor? I would like to use it to move a boat (about 3500 lbs) arround the property and give rides on a old hay wagon.

towing with 7205
Cub Cadet
Replies 7 Post by ron

If you would like to see pictures of the Kubota L3130 with Koyker 145 loader, please give Koyker a call and we will e-mail you them. Thanks

Koyker fel s
Kubota Tractors
Replies 2 Post by Ron

I recently purchased an older model 1800 Tractor. When it is cold, the hydro. lift works great. After a few minutes it quits working altogether. Help??

1800 Tractor no lift when warmed up
Shibaura
Replies 5 Post by Ron

I'm in texas close to deen eqp.
they aren't in the shipping business & have no control over
what trucks charge to haul a load.
they do make some of the best deals in the state & it appears country, on kubotas.
they are very nice, family owned & I picked up an L3010
for a steal. they are great people.
at least try to make your dealers match their prices.
it's worth the drive or shipping if they won't !

Kubota L4300 price from distant Deen Equipment
Kubota Tractors
Replies 6 Post by Ron

what is a good price for a 1985 kh-28 kubota? unknown condition.looks pretty good,no leaks anywhere.

trackhoe
Kubota Tractors
Replies 2 Post by ron

I have a 1937 and a 1946 W.C. AllisChamblers both have
a mechanical lift. What hydralics?

Hydraulic control on WC Allis
Antique Tractors
Replies 7 Post by Ron

I have a JD 790 w/ballast box. I filled mine with a few inches of small gravel on the bottom for drainage, then topped it off with sand. The sand sure comes in handy for sprinkling on those icey driveway spots after im done pushing the snow. I also use the sand to clean my garden tools in the spring. I force the shovels, hoe etc.into the sand and it cleans all the gunk and rust off.
I understand your thoughts about the concrete.It does seem that you would have more weight, but it's so permenant. Using sand would give you more options down the road.

JD4110 ballast box
John Deere Tractors
Replies 18 Post by Ron

SouthAg Distributing in North Carolina is a ProLine distributor. You should be able to get parts from them, or at least get a name for a parts source. Their number is 919-365-5111

Tilting Scraper Blade
Operating and Attachments
Replies 2 Post by Ron

I have the same problem with my 1530. If you go from any neutral all the way to the rear and then to desired setting, It works fine. Or as you do, shirt, fwd or back with hydro slightly and it will shift without fuss.

New Holland trouble
New Holland Tractors
Replies 19 Post by Ron

Looking for a 3pt. hitch and service manual for Bolens 5120H.

Bolens 5120
Operating and Attachments
Replies 1 Post by Ron

I am slightly confused by these posts. I have had a JD 750 for 15 years and loved it. I've done everything but set if on fire and it will not die. I am now looking at a 4300 and love it. More comfortable, easy to steer, more features, and still seems to have the JD quality that I'm used to. If there is any reason for me not to get the 4300, somebody please tell me.<br>

JD 855 955 problems
John Deere Tractors
Replies 6 Post by Ron

McMaster Carr will sell 10 ft lengths of the hose you need and they accept credit cards and ship promptly. Look for Rough-N-Tough Rubber Hose. Part # for 7

http://www.mcmaster.com/
"> Source for 6 quot Leaf Vac Hose
Other Tractor Brands
Replies 5 Post by Ron