Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Gerry,
Each (single) ballest weights 25lb's.
My zip code is 23322.

Contact me through my Web Site if you choose for price. Don't think Tractor Point approves of posting prices?

Ronald
Ranch Hand Supply

Front wheel weights farm pro 2425
Jinma Farmpro Agracat Nortrac
Replies 6 Post by RanchHand

[QUOTE=needhelp;163877] I have a nortrrac 40 hp and can't find a oil filter to fit it. m24x2 treads any body know the right filter ? [/QUOTE]

I am assumeing your tractor is a rebaged Foton 404. If so, I have a aftermarket oil filter nipple that may work for you ??

Ronald
Ranch Hand Supply

oil filter
Jinma Farmpro Agracat Nortrac
Replies 8 Post by RanchHand

Hi Leo,
Our terminology may be different but, here is what I have seen / found on the 200 series Jinma tractors..... 204/224/254/284 models etc. Hopefully I / we understand each other.

Click on the link button and it will take you to a page on my web site that shows several styles of hydraulic lift boxes. PLEASE, if you have a different style of lift box I would love for you to email me some pictures of it.

I assume you have two factory hydraulic quick connects coming off the back of the lift box...(father- mother connection at the back side of the tractor under the driver seat).

One is pressure & one is return. It is considered 1/2 remotes. Meaning you cannot use the 3 point lift and have pressure at the hydraulic quick connect at the same time.

There is a valve bolted on to the front of the lift box down between your legs. It has a knob coming out of the top of it. There is a little lock screw that has to be loosen before you can turn the knob. The knob may be stuck (rust) and will require freeing up ??

To get hydraulic pressure / fluid the quick connect that is connect to the valve via the hard line (pipe).

Push the 3 point lever down. Then screw the knob all the way down till it stops / bottoms out.

Now pull the 3 point lever up.

Fluid is now being diverted to that quick connect.

What I have seen and have heard from other owners that have tried to use the 1/2 remotes to operate... say a wood splitter (a two way hydraulic cylinder) is that they have enough pressure but not enough volume (speed). Your case / experience may be different ??.

I came up with a aftermarket constant flow hydraulic kit that does not restrict the volume of the hydraulic fluid.

Hope this made since??

Ronald
Ranch Hand Supply

jinma 224
Jinma Farmpro Agracat Nortrac
Replies 12 Post by RanchHand

[QUOTE=nclark;160459] Has anyone got the american replacement part for the chinese oil filter that comes with the Jinma 284?And what Oil do you use to change the oil? [/QUOTE]

If you can read the filter number that CAME on the tractor is the best way to help ID what filter you have and to help come up with a aftermarket filter.

There have been several Jinma's that came with extra engine filters in the tool kit that were the wrong ones. One number on the tractor & another number filter in the tool kit.

Click on the link below ..... you may need one of these oil filter nipples ??

Let us know what filter number you have if possible ?

Ronald
Ranch Hand Supply

Oil and filter for Jinma 284
Jinma Farmpro Agracat Nortrac
Replies 5 Post by RanchHand

gvems22,
I understand your problem reading the model number.

Food for thought;

Some Agracat models ... not all.

2910, 2720, 2740.

Don't know if yours is two wheel drive or four wheel drive ?. Power steering or manual steering. That will help determine the model if it is a Jinma.

Don't know if it is a 2 cylinder or a 3 cylinder ?.

See if the engine tag says, MFD by Yangdong.

You can email me some pictures if you like.

ronald@ranchhandsupply.com

Ronald
Ranch Hand Supply

agracat 2710
Jinma Farmpro Agracat Nortrac
Replies 16 Post by RanchHand

Good Job !

Thanks for the feed back.

Ronald
Ranch Hand Supply

Farm Pro 2425 won t start
Jinma Farmpro Agracat Nortrac
Replies 8 Post by RanchHand

I only have experiance with the Originial Jinma chippers.

The spring around the feed drum drive shaft is what provides the pressure to keep the clutch engaged on the factory drive shaft set up.

Maybe your replacement drive shaft set up is not doing that ??

I have not had that problem yet with all the chippers I have sold.

Sounds like there is no spring pressure holding it there or something is pulling it apart ??

Ronald
Ranch Hand Supply

Jinma 6 chipper feed mechanism problems
Operating and Attachments
Replies 8 Post by RanchHand

LW, I am going to assume you have the one peice dash?.

The horn relay has four prongs.

The Turn signal flasher has 3 prongs. Both your turn signals and hazards use the same flasher and is not your typical 3 prong flasher... FACTORY PART.

The wire I think your are taliking about is black... if so ??... it is a ground.

Ronald
Ranch Hand Supply

turn signals and four way flashers
Jinma Farmpro Agracat Nortrac
Replies 8 Post by RanchHand

Tommy at www.affordabletractorsalesco.com in Tx has some cranks and bearings but don't think in a kit form. I spoke with him the other day and he has complete engines.

Ronald
Ranch Hand Supply

Y385 Engine rebuild kits
Jinma Farmpro Agracat Nortrac
Replies 4 Post by RanchHand

Yes, many have installed a relay to carry the load.

Ronald
Ranch Hand Supply

Jinma Ignition switch
Jinma Farmpro Agracat Nortrac
Replies 4 Post by RanchHand

One more thing to check... clutch switch.

Ronald
Ranch Hand Supply

Farm Pro 2420 won t start
Jinma Farmpro Agracat Nortrac
Replies 49 Post by RanchHand

Make sure your clutch safety switch is good.

Ronald
Ranch Hand Supply

Jinma 284 troublshooting starting
Jinma Farmpro Agracat Nortrac
Replies 4 Post by RanchHand

I don't know of any one in your area... sorry.

Some of the tractor shops decline due to they don't know where to get the parts.

We work on all the re labeled Jinmas etc.

We had a guy come down this week from TN.

If I can help you let me know.

Ronald
Ranch Hand Supply
Chesapeake VA.

Nortrac NT-254 rear seal blown
Jinma Farmpro Agracat Nortrac
Replies 13 Post by RanchHand

There are a couple styles of lift boxes.<br>
<br>
Most fill holes ..... the plug/dip stick has red paint on it Behind seat ,,, above the top link.<br>
<br>
I use/install AW32 Hyd Oil.<br>
<br>
Here are some Misc Pic's<br>
<br>
<br>
<br>
Ronald<br>
Ranch Hand Supply<br>

Agracat 254 drips Hydraulic oil
Jinma Farmpro Agracat Nortrac
Replies 7 Post by RanchHand

Chipping that cedar is/was a good little test .... <br>
<br>
We service/prep 99% of all the chippers we sell. Change/fliping the blades is a two man job for sure. You may have already done this .........but we have found that if we remove the 4 bolts that hold the feed shoot on makes holding the allen head bolts easier while turning the nuts..... anvil to.<br>
<br>
Do you know if the feed drum was at it's max height when the knuckle broke?<br>
<br>
Ronald<br>
Ranch Hand Supply<br>

Jinma chipper review
Operating and Attachments
Replies 44 Post by RanchHand

I agree with Chip you have a EPA engine.

If you have not already changed the injection pump oil ??? I would recommend you to. Also I would use 5-30 engine oil and see if that helps/corrects the cold start idle problem.

Ronald
Ranch Hand Supply

Taskmaster 435 idle control
Jinma Farmpro Agracat Nortrac
Replies 10 Post by RanchHand

It's hard to cover everything in a post but,

Take the litte/small wire off the starter solenoid and make sure it is not touching anything and see if it will blow the fuse then.

If it does ... odds are ingition switch is bad.

If it blows only with the wire connected to the solenoid then odds are the solenoid is bad.

Also, the small wire off the solenoid could be contacting ground ?

let us know

Ronald
Ranch Hand Supply

jimna 2524 busting 30 amp fuse wont start
Jinma Farmpro Agracat Nortrac
Replies 10 Post by RanchHand

Also, Make sure you don't have a problem with your clutch safety switch.

Ronald
Ranch Hand Supply

Agracat 2920 Tractor will not start
Jinma Farmpro Agracat Nortrac
Replies 29 Post by RanchHand

quote: I just tried to put the PTO in gear with the engine running and foot off clutch. It didn't grind when I tried this. Is this something broke inside the housing possible or clutch needing adjustment/replacement? end quote; Yes, it could be something broken inside.... still assuming you have a two stage clutch the main clutch is releasing or you would not be able to get the transmission into gear. Either the PTO input shaft is not turning or some part of the linkage is broken inside that engages the pto.

The noise when you press the clutch pedal maybe clutch related ... if so the tractor will have to be split, not a real big shop be there is some do's and don'ts.

Something broken in linkage would require to remove the lift box under the seat ..... if you can do a head gasket you can do this........... pretty easy job.

Sounds like it has been a good tractor ..... should be a good tractor for another 10 years and still less than 10K

Look at the 254 PTO pictures after clicking on the picture link below.

You can contact me through my web site if you want me to give you a call sometime. www.ranchhandsupply.com

Ronald
Ranch Hand Supply

PTO Problem
Jinma Farmpro Agracat Nortrac
Replies 10 Post by RanchHand

I don't have one in stock at this time......

Call Jerry At 1-979-865-4002

Ronald
Ranch Hand Supply

Lift shaft for 354
Jinma Farmpro Agracat Nortrac
Replies 5 Post by RanchHand