Go Bottombx electrical corrosion problem
 | cthonestguy
Join Date: Jun 2004 Posts: 267 northeast 
|
2004-08-15 93603
I have a bx2200 which has had it's share of minor electrical problems. The fuse block that hangs near the radiator now seems to be the latest. It wasn't charging again. I did notice when it's functioning properly the chargin light comes on with the hkey and shuts off with the engine starting. I noticed the light was off again and jiggled the fuse block to find it come on and it started to charge again.
I think the fuse block must have some corrosion in it? This suprises me for a 2001 machine. Does anyone have a chemical they have used with luck to either clean the corrosion or keep it from building up?
thanks..Jim
Reply to |
Quote Reply |
Add Photobx electrical corrosion problem
 | Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York 
 Pics
|
2004-08-15 93618
WD-40 often works. When the terminals have all been cleaned dielectric grease helps to keep moisture out. ....
Reply to |
Quote Reply |
Add Photobx electrical corrosion problem
 | AnnBrush
Join Date: Mar 2004 Posts: 463 Troy OH
Pics
|
2004-08-16 93662
I use a product in an aerosol can called Battery terminal protector, it is basically a red colored grease. Works great, sprays on fine and then stiffens up to prevent and corrosion problems. ....
Reply to |
Quote Reply |
Add Photobx electrical corrosion problem
 | bobodude
Join Date: Jul 2003 Posts: 32 Oakley, Calif and Garnerville, Nv
Pics
|
2004-08-16 93663
I'm not familar with the bx2200 but it sounds like loose wire connections. Are there terminal screws that can be tightened up or Molex connectors that may need some cleaning? What works good on molex connectors is some contact cleaner in an airesol can from Radio Shack. Otherwise you have freyed wires that may be shorting out to the frame or opening the circuit. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This