Ford 1210 fan belt pulley and crankshaft balance
Martin
Join Date: Mar 2005 Posts: 0 Las Vegas |
1999-10-16 8829
The fan belt pulley on my ford 1210 came off and I need to know how to align it with the crankshaft so the engine is balanced.(the pulley is weighted) There are no marks on the pulley or the end of the crankshaft, and the manual says nothing about it. Any ideas? Thanks in advance, Martin
Reply to | Quote Reply | Add Photo
Ford 1210 fan belt pulley and crankshaft balance
RickB.
Join Date: Posts: 1 |
1999-10-16 8839
Look more closely. There should be a center punch mark on both the crankshaft and pulley to index the proper position of the pulley. I just replaced a front seal on a 1210 last week, so it's fresh in my mind. ....
Reply to | Quote Reply | Add Photo
Ford 1210 fan belt pulley and crankshaft balance
Martin
Join Date: Mar 2005 Posts: 0 Las Vegas |
1999-10-17 8847
Thanks Rick B for your response. I've looked closely at both parts already - the only mark on the pulley that could be a punch mark looks more like a flaw in the casting to me, and theres nothing on the end of the crankshaft. Unfortunately when the pulley came off it bounced around for a while possibly erasing a mark on the end of the crankshaft, altho' the crankshaft is made of pretty hard steel so I think thats unlikely. Any other ideas? Thanks Martin ....
Reply to | Quote Reply | Add Photo
Go Top
Share This