Bucket forks
craig
Join Date: Posts: 1 |
1999-09-13 7941
Does anyone know where I can get a hold of the hooks to weld onto a bucket for accepting a set of bucket forks? I am looking at this as the lowest cost option to have a set of forks for my 410 loader on my 4100. Has anyone out there tried bucket forks? and if so, is the bucket stout enough to handle average loads without abuse? Or does anyone have an idea that would be cheaper?
Reply to | Quote Reply | Add Photo
Bucket forks
Jon
Join Date: Posts: 1 |
1999-09-14 7958
Can't make out your image? ....
Reply to | Quote Reply | Add Photo
Bucket forks
bill
Join Date: Posts: 1 |
1999-09-14 7959
Try www.easternfarmmachinery.com I bought a small set for my ford 1710 they work good, make sure you buy the right size. ....
Reply to | Quote Reply | Add Photo
Bucket forks
Ted
Join Date: Posts: 1 |
1999-09-14 7961
....
Reply to | Quote Reply | Add Photo
Bucket forks
DANA
Join Date: Posts: 1 |
1999-09-14 7962
If your are refering to a set of pallet forks? I built mine and i'll tell you how i did it. ....
Reply to | Quote Reply | Add Photo
Bucket forks
GF
Join Date: Posts: 1 |
1999-09-14 7964
Deleted ....
Reply to | Quote Reply | Add Photo
Bucket forks
Brent
Join Date: Posts: 1 |
1999-09-14 7965
Craig I built a set of forklift forks for my compact about a year ago. I built a set of forks onto a frame that hangs from my bucket. At the top of the frame there is a piece of 2" steel box tubing with 1" pipe on each end. I built two very strong hooks and welded them on the sides of my bucket up high. I built hooks big enough to accomadate the pipe, not chain hooks. The pipe ends rest in the hooks. It has it's advantages and disadvantages. Advantage: I can attach my forks without removing my bucket. Disadvantage: As of right now if I tilt my forks to roll the load off the forks, the forks just sway instead of staying with the bucket. I am working on that part though. With this setup I have picked up about 800lbs. ....
Reply to | Quote Reply | Add Photo
Bucket forks
Stanley
Join Date: Jul 2007 Posts: 21 Ste-Beatrix, Quebec, Canada |
1999-09-14 7992
Dana or Brent, you wouldn't have any photos of the pallet forks, would you? ....
Reply to | Quote Reply | Add Photo
Bucket forks
Brent
Join Date: Posts: 1 |
1999-09-15 8003
I will borrow my dad's digital camera and I will post them on the board. ....
Reply to | Quote Reply | Add Photo
Bucket forks
dana
Join Date: Posts: 1 |
1999-09-15 8006
I'll will have a friend take pic's & post them.dana ....
Reply to | Quote Reply | Add Photo
Bucket forks
Dana
Join Date: Posts: 1 |
1999-09-21 8181
....
Reply to | Quote Reply | Add Photo
Bucket forks
Dana
Join Date: Posts: 1 |
1999-09-21 8182
Pallet forks. Here's a picture of one that I built. ....
Reply to | Quote Reply | Add Photo
Bucket forks
Dana
Join Date: Posts: 1 |
1999-09-21 8183
....
Reply to | Quote Reply | Add Photo
Bucket forks
stanley
Join Date: Posts: 1 |
1999-09-21 8186
Thanks for taking the time to post the photo of the pallet forks. Stanley ....
Reply to | Quote Reply | Add Photo
Go Top
Share This