Go Bottom Go Bottom

4310 John Deere Tractor Error Codes No Movement

View my Photos
pewinter
Join Date: Sep 2021
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2021-09-29          200715

I have a 4310 John Deere utiity tractor. I am getting an error code. It displays as 1 long 3 short. The tractor runs but when pressing forward or back pedals the tractor does not move.

Any ideas?


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



4310 John Deere Tractor Error Codes No Movement

View my Photos
Chief
Join Date: Jul 2003
Posts: 4299 Southwest MiddleTennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2021-10-04          200724

Is your tractor transmission eHydro? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



4310 John Deere Tractor Error Codes No Movement

View my Photos
Chief
Join Date: Jul 2003
Posts: 4299 Southwest MiddleTennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2021-10-04          200725

Duh! Missed the part about forward & rear pedal. According to my TM1895 :

Simultaneous command from Forward and Reverse,

I have had this happen on occasion during operations doing brush hogging in very tall weeds. The thick stems of the weeds can get jammed up in the pedal linkage. This can cause a simultaneous command forward and reverse which will throw this code and the tractor will not move. A quick inspection of the pedal linkages and removing plant debry got me going again.

Hope this gets your tractor moving again. Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login