Go Bottom Go Bottom

Kubota B7500 2WD to 4WD shift on the fly

View my Photos
Gregone
Join Date: Aug 2020
Posts: 3 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-08-23          199639

Hi this Kubota B7500 tractor is new to me.

The seller told me that I can shift from 2WD to 4WD while moving as long as the steering wheel is straight without using the clutch.

He said that is always the way he has done it with no issues.

He gave me the owners manual and it s says to always depress the clutch. I tried that would cause me to come to a stop disengage my MMM and really put a strain on the clutch plate.

Any advice appreciated.

Greg



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Kubota B7500 2WD to 4WD shift on the fly

View my Photos
joyce1
Join Date: May 2004
Posts: 43 Virgina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-09-17          199697

I am sure your manual says to depress the clutch when shifting from 2 to 4wd as that is the only way to be sure the gears will not grind.

It is not a clutch-less set up. But that said I think you may be able to do it without clutching as was described with wheels completely straight, carefully jiggling the level to 4wd. Any grinding STOP right away and go back to the manual way LOL !
....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Kubota B7500 2WD to 4WD shift on the fly

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2020-09-17          199698

I think this is one of those 'there's no right answer' questions.

First off, the dealers position, wheels straight & etc., is sound advice. The 'no clutch' part isn't wrong, the front axle / rear axle connection is after the clutch so as long as the wheels are turning the gears are doing the same things, regardless of clutch / no clutch.

The owners manual position, again, not wrong. The likely reason for that recommendation though is that there's a lead / lag in the front to rear axle gear ratios. The front axle spins 35 - 5% faster than the rear axle to prevent 'wallowing' while underway. The reduced load by depressing the clutch would reduce the load on the gears while shifting into / out of 4WD.

The clutch only needs to be depress for a second or two while shifting, there's no need to hold it down for long enough for the tractor or mower to come to a stop though.


Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login