Go Bottom2520 Cranks but won t start
 | lannino
Join Date: Jun 2018 Posts: 4 CT. 
|
2018-06-16 197810
I have a 2012 JD 2520 HST with only 13 hours on it. It stalled and now won't start. It cranks fine and try's to start but then immediately shuts off. I changed the diesel fuel, sediment and fuel filters in case that was the problem but it still won't start. Yanmar 3 cyl diesel says it's self bleeding. Any Suggestions Please
Reply to |
Quote Reply |
Add Photo2520 Cranks but won t start
 | PaulChristenson
Join Date: Dec 2007 Posts: 83 Vermont
 Pics
|
2018-06-16 197811
In the on position with the engine off, can you hear the fuel pump ticking? ....
Reply to |
Quote Reply |
Add Photo2520 Cranks but won t start
| lannino
Join Date: Jun 2018 Posts: 4 CT.
|
2018-06-18 197812
PaulChristenson
Yes Paul the pump comes on and moves the fuel ....
Reply to |
Quote Reply |
Add Photo2520 Cranks but won t start
| lannino
Join Date: Jun 2018 Posts: 4 CT.
|
2018-06-18 197813
PaulChristenson
Yes Paul the pump comes on and moves the fuel ....
Reply to |
Quote Reply |
Add Photo2520 Cranks but won t start
| PaulChristenson
Join Date: Dec 2007 Posts: 83 Vermont
Pics
|
2018-06-18 197814
If it doesn't start...here are some things to check...
Transmission range shift lever not in proper position.
PTO engaged.
Engine speed hand throttle not pushed forward.
Fuel shut-off valve CLOSED (OFF).
Stale fuel / improper fuel / fuel level.
Plugged fuel filter.
Plugged air intake filter.
Dirty or faulty fuel injectors.
Blown fuse.
Failed fuel solenoid.
Other electrical problem. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This