Go BottomB7500 DT-TLB 3 Point control knob will not turn
 | Grinder11
Join Date: Sep 2015 Posts: 13 Mayville, Michigan 
|
2015-10-29 193941
I recently read a post about a 3 point hitch not lifting on a B7500. My problem is not the exactly the same, but has to do with the knob that controls the 3 point on my own B7500. I couldn't guess my 3 point works, or not, because the dial/knob that is supposed to turn seems frozen, or is seized!! The 3 point is all the way up. But even using both hands, it will not budge. My 7500 is a DT-TLB. Backhoe is a Woods 6500 model mounted to the frame and center link of the 3 point. Perhaps this knob was intentionally twisted VERY TIGHT, due to the Backhoe being mounted to the center post/link? Maybe to avoid unintentionlly activating the 3 point? Thanks-Appreciate any help you guys can offer....
Reply to |
Quote Reply |
Add PhotoB7500 DT-TLB 3 Point control knob will not turn
 | kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina 
 Pics
|
2015-10-30 193951
I do not know what the lift lever setup on that model Kubota is like but have two different models and have found you need to keep the levers and all their linkage and contact oiled for they tend to rust in place very quickly, like between use. No doubt part of that comes from using them to spread fertilizer maybe some other chemicals. I just spray with WD 40. Hope that solves your issue. ....
Reply to |
Quote Reply |
Add PhotoB7500 DT-TLB 3 Point control knob will not turn
| charlieK
Join Date: Feb 2004 Posts: 137 kentucky
|
2015-11-06 194024
that knob has to work and function correctly ....
Reply to |
Quote Reply |
Add PhotoB7500 DT-TLB 3 Point control knob will not turn
 | Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York
Pics
|
2015-11-09 194029
Some times they do get stuck and a little help maybe needed to get them to turn. Go easy on the knob so you don't break it off so get a good pair of vice grips on the shaft. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This