Go Bottom Go Bottom

JD 4210 Wiring Diagram

View my Photos
jfbecke
Join Date: May 2012
Posts: 3 Tennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-05-05          183461

Cannot get my Mid-Mount mower to run. The PTO clutch or something is not engaging. The light comes on the dash but no shaft output. Could this be an electrical problem?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD 4210 Wiring Diagram

View my Photos
jfbecke
Join Date: May 2012
Posts: 3 Tennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-05-05          183462

OK, Could not find a diagram today so I just started tracing the circuit. What I found was the solenoid coil had failed on the MId-mount engagement valve. I will have to order a new one. It has a quick disconnect plug on the wiring harness and the coil just slips on the valve with a retaining nut that holds it in place. I hope this helps someone else in the future. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD 4210 Wiring Diagram

View my Photos
auerbach
Join Date: Sep 2007
Posts: 2168 West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2012-05-06          183463

I'm sure it will -- thanks. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login