Go Bottomjohn deere 2010 three point pump repair
 | JD-2010
Join Date: Sep 2009 Posts: 2 indiana 
|
2009-09-02 165405
I have a 2010 and need to check out my pistons and check valves that operate my three point arms and fluid supply
to my power steering and front end loader. my arms no longer stay up after the tractor is shut off and when a load of any kind is on my bail tote in the rear I get a bouncing, I was told I have a blowed piston rings or check valve bad. has anyone every had this apart. I have a new john deere manuel on the way, but any help would be greatly appreciated.
Thank You
JD-2010
Reply to |
Quote Reply |
Add Photojohn deere 2010 three point pump repair
 | Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York 
 Pics
|
2009-09-12 165597
There are times the books aren't much good and you ahve a bit of a chore ahead to figure out what is really bad. The cylinder could be the problem or the control valve itself.
Something is definitely leaking by there is no doubt about it! ....
Reply to |
Quote Reply |
Add Photojohn deere 2010 three point pump repair
| jdgreen
Join Date: Jul 2003 Posts: 232 Maryland
|
2009-09-12 165607
The 2010 rockshaft can be tricky to repair. Especially if it is a dual rockshaft. The most important part is to removed every plug, valve and piston in the entire assembly. Clean and inspect everything. Blown seals, stuck valves and misadjusted linkage are the usual problems. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This