work lights 2210 JD installation
jackrabbits
Join Date: Jan 2011 Posts: 3 South Dakota |
2011-01-13 176392
I need help installing work lights. I found the extra feed in the rear of the unit but after quickly pig tailing in the light to see if they worked nothing happened.
The fuse is good but I can't seem to get the lights to turn one before mounting them. Any suggestions?
Reply to | Quote Reply | Add Photo
work lights 2210 JD installation
candoarms
Join Date: Mar 2007 Posts: 1932 North Dakota Pics |
2011-01-13 176393
Jackrabbits,
I'm assuming by "feed wire", you mean just a single wire.
Most work lamps are grounded through the metal body. You'll need to at least touch the metal mounting bracket to the tractor frame before they'll light.
If you have a tester, see if you have power to the feed wire. You'll need to attach your tester's red lead to the feed wire. The black lead will fasten to an unpainted/clean portion of the tractor's frame.
I hope this helps.
Joel ....
Reply to | Quote Reply | Add Photo
work lights 2210 JD installation
jackrabbits
Join Date: Jan 2011 Posts: 3 South Dakota |
2011-01-14 176412
Thanks Joel...we'll give that a try but there is red and black coming out so I connected them both? Sounds pretty basic but am "pulling my hair out". Might have to go get a tester. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This