Go BottomTC35 16LA Loader surge Help
 | mtullis
Join Date: Jan 2005 Posts: 11 GA 
|
2010-08-07 172879
I have a 2004 TC35 (NOT HST) (500Hr on it) with a 16LA loader.
The loader has started to surge or rase about 3-4 in then stop then go 3-4 more to full hight, fluid is full, filter chaged about 1 mon ago. Where is a good place to start looking for the problem?
Reply to |
Quote Reply |
Add PhotoTC35 16LA Loader surge Help
 | auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto 
 Pics
|
2010-08-07 172885
Correct if wrong. When the RPMs are up, even with a load in the bucket, the raise-lower arms spontaneously raise when you're not touching the controller, which is a single joy-stick with four quick-connects feeding it. ....
Reply to |
Quote Reply |
Add PhotoTC35 16LA Loader surge Help
 | earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan
Pics
|
2010-08-07 172888
Could be the wrong fluid which is aerated or foamed. Air could be in the cylinders. When the air compresses and pressure overcomes friction in the cylinders that's when it jumps.
But, if that's not the case then the pump is shot---my experience. ....
Reply to |
Quote Reply |
Add PhotoTC35 16LA Loader surge Help
| mtullis
Join Date: Jan 2005 Posts: 11 GA
|
2010-08-07 172890
It is a single stick but the loader works like it should it just slow and jumps when your useing picks up the same amount. It like it's starving the pump for fluid, and it does have the right fluid in it. I was just using it and now have a new problem I boke something in the left front axle so I now have a 2WD TC35 with a surgeing FEL. I can fix the axel, but the loader I don't know about. ....
Reply to |
Quote Reply |
Add PhotoTC35 16LA Loader surge Help
| mtullis
Join Date: Jan 2005 Posts: 11 GA
|
2010-08-11 173030
Is there a strainer I can change or is the filter (has a new filter on it) the only thing to change? I still think I'm getting air in the system or the fluid intake is stopped up. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This