283 MF hydraulic problems
Donovan1
Join Date: Apr 2011 Posts: 3 Raceland Louisiana |
2011-04-19 178056
I been trying to trouble shut this problem with out much success. The hydraulics was not working at all auxiliary nor 3pt. So I dropped the filter cleaned it very dirty filled with diesel worked hydraulics several hours. Auxiliaries worked great 3pt. Worked with no weight but with 205 pounds bleed down wouldn't hold or lift with weight. Drained diesel cleaned filter again filled with hydraulic fluid now 3pt. Does not work auxiliary works great. I pulled cover off and ran tractor with cover off auxiliary has lots of return the the tub ( exhaust pipe ) running to the selector valve / hydraulics pump controler. Has hardly any flow I can stop the flow with my fingure. It is a 283 UK model 1987 if anyone can help I would be greatly thank full,
Reply to | Quote Reply | Add Photo
283 MF hydraulic problems
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2011-04-20 178069
Does this tractor have the selector on the hyd to select either the remote or the 3 pth? MF used that set up on many of their tractors and I think some 283s also. They did this at it cost less than their other system which supplied fluid to both. If you do you could have the lever bumped where it is between them causing poor flow to both. ....
Reply to | Quote Reply | Add Photo
283 MF hydraulic problems
Donovan1
Join Date: Apr 2011 Posts: 3 Raceland Louisiana |
2011-04-20 178074
No it does not I purchased the tractor from a friend of mine with it not working. But when everything was working you could use the 3pt. And the remotes with out switching anything. I went one agcoparts.com and find the parts the way mines set up is it has a hydraulic, pump control - M K3 A. And a 2-spool valve - R.H controls - Combined Flow - live PTO. Looking at the pictures that's what it looks like. When you first start it up you get a little movement in the 3pt. But not much. Only at start up
Thanks, ....
Reply to | Quote Reply | Add Photo
Go Top
Share This