Go Bottom Go Bottom

Long 510 3 Point hydraulic problems

View my Photos
hhott24rrodd
Join Date: Jan 2014
Posts: 7 alabama
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-02-18          192153

I rebuilt hydraulic lift valve. Now it comes up weak and does not go down.


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Long 510 3 Point hydraulic problems

View my Photos
arcwelder
Join Date: Mar 2014
Posts: 111 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-02-19          192154

My 2510 was like that when I got it.
Things that come to mind, is the depth control turned off.
The small lever down and behind the main one push toward the axle.
On mine, The linkages for the control were bound up.
I took everything off and cleaned it up. You have to be careful, take a picture of everything as you take it off.
There is a lever that actually controls the lift, it has a wheel on it. The wheel rides on the controls.
If you move it then the lift should move both up and down.
If moving that lever lifts well and goes down, then the linkage could be put on wrong or bound up like mine.

Link for Download PDF manual, covers 360, 460, 510

I use the 510 part for my 2510. Most applies to all Long tractors, just some differences like engine cyl size and number.

http://tractorpoint.com/pdf/Long Service Manual for 360-460-510 series.pdf
....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Long 510 3 Point hydraulic problems

View my Photos
arcwelder
Join Date: Mar 2014
Posts: 111 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-02-28          192225

any luck? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login