Go Bottom

---

Ogura Clutch Bearings GT2-MC01

dnrsslr Join Date: Sep 2009 Posts: 6 Ohio

2009-11-30          167100

After replacing the center shaft bearings, all the idler bearings and the bearings on the front idler, it is VERY quiet when the clutch is engaged. But, it is noisy when the clutch is not engaged. I have read that it is probably the pulley side bearing. Has anyone changed one of these bearings in an Ogura clutch? How do you get the bearing out? The clutch is an Ogura GT2-MC01. Can anyone give me the exact bearing numbers for both sides of this clutch?

Thanks in advance for any help!

Reply to | Quote Reply | Add Photo

---

Ogura Clutch Bearings GT2-MC01

Murf Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada   Pics

2009-12-01          167108

You don't get the bearing out, the complete unit including the pulley and mount and all is a sub-assembly that comes as a single unit.

They are about $100 each and are available at any place that sells commercial mower parts. It's the same one used in several models of Ferris and Scag mowers, widely available, just Google it and choose your vendor.

Not that I'm particularly recommending them, but the place below lists them, they were merely the first place that came up.


Best of luck. ....


Link:   Air Cooled Engines Website.

 
Reply to | Quote Reply | Add Photo

---

Ogura Clutch Bearings GT2-MC01

dnrsslr Join Date: Sep 2009 Posts: 6 Ohio

2010-08-16          173160

Update:
I changed the bearings in the clutch this spring. Ahhh... much quieter! :) It was a little bit of a pain but not too bad. ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !