
Track operation question
![]() | Scott Bennetta
Join Date: Posts: 1 ![]() |
2001-03-10 25327
When backing up our case 850c if you step on the left tracks break, sometimes it track doesn't start moving again when you let off the break. If you put the track in neutral and then back in the reverse the track will start moving again. We tightened the tension of the track which helps but it still does it sometimes. Any other suggestions for what else it could be? Does anyone know where we can order a shop manual for the 850c?Thanks in advance.
Reply to |


Track operation question
![]() | Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada ![]() ![]() |
2001-03-12 25393
Scott, I think you will find that the problem is a sticking steering clutch, probably caused by surface rust. Unfortunately there is no easy way to get to it but with a little use it should clear up, if not you will need to get to it to clean and re-lube it. Best of luck. ....
Reply to |




Share This