![Go Bottom](http://tractorpoint.com/images/pageDown_sml.png)
Lincoln 335 Tig Welder
![]() | southpaw
Join Date: Jan 2009 Posts: 2 Jackson, Michigan ![]() |
2009-01-22 159726
I have a question with My Lincoln tig 335 welder, when I step up to using a 5/32 tungstein pure or thoriated rod,and start welding 3/8 aluminum, the weld becomes real contaminated looking and will not even take the filler rod, and now if I down size to a 1/8 tungstein rod pure or even red with same settings I have know problem welding, except the tungstein starts to go away for the heat, I am using 280 amps and that is max for that tungstein, I have changed cups to bigger to get more cleaning action, I run the argon at 12 to 20 on the flow meter, trying different combinations, but it almost seems that I am pushing the weld, when I start to use the 5/32 tungstein, I know I have still not given enough information, but if you can get me started down the right path, I will feed you more. thanks for anything....Jim.........
Reply to |
![Quote Post Reply to Post](https://tractorpoint.com/ctb/images/reply.gif)
![Add Photo](https://tractorpoint.com/ctb/images/photoS.gif)
Lincoln 335 Tig Welder
![]() | auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto ![]() ![]() |
2009-01-22 159742
I have a Lincoln (not a TIG) so can tell you that on their website you can sign up for a free newsletter on the type that you do. ....
Reply to |
![Quote Post Reply to Post](https://tractorpoint.com/ctb/images/reply.gif)
![Add Photo](https://tractorpoint.com/ctb/images/photoS.gif)
Lincoln 335 Tig Welder
![]() | AC5ZO
Join Date: Jul 2003 Posts: 928 Rio Rancho, NM 87144 ![]() ![]() |
2009-01-22 159748
First of all, you must weld Al with AC. You use DC for most others.
If you have a squarewave welder, adjust the positive/negative balance to about 80% electrode negative. This will keep the heat out of the 1/8 tungsten while still cleaning the Aluminum. Weld forehand style to clean the weld in front of your torch with the Argon.
Use only pure tungsten and Argon for Al.
I weld 3/8 aluminum with much less current, but I do turn up the arc frequency to about 150 Hz. I don't even own any collets for tungsten larger than 1/8".
I hope this helps.
....
Reply to |
![Quote Post Reply to Post](https://tractorpoint.com/ctb/images/reply.gif)
![Add Photo](https://tractorpoint.com/ctb/images/photoS.gif)
![Go Top](http://tractorpoint.com/images/pageUp_sml.png)
![Share This](http://tractorpoint.com/images/share_this_sml.png)
Share This