Go Bottomwelding on a generator
 | kleinchris
Join Date: Jun 2007 Posts: 269 Westminster, Texas 
|
2007-08-09 144558
Can I do this? I was about to weld some pockets onto a generator so I could get it with my forks and then I thought I might fry something. So I'm asking you folks. As long as it is not running I'm okay, right?
Reply to |
Quote Reply |
Add Photowelding on a generator
 | candoarms
Join Date: Mar 2007 Posts: 1932 North Dakota 
 Pics
|
2007-08-09 144560
Kleinchris,
So long as the generator isn't running, you should have no trouble at all.
Connect your ground clamp as close to your work area as possible, and make sure you have a good connection. Electricity always follows the path of least resistance.
Joel ....
Reply to |
Quote Reply |
Add Photowelding on a generator
 | earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan 
Pics
|
2007-08-10 144598
Be sure to disconnect any electrical ground connection such a wire cable or flexible wire strap between the generator and/or the engine and roll cage. And if the gen./eng. does not have rubber dampeners/isolators (which act as insulators) somehow disconnect that attachment. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This